Special design for tyre crane,bridge testing vehicle etc large mechanical equipments IP65.
Application
Special design for Crawler crane, Truck crane, Bridge inspection vehicle etc. large lift, cantilever machinery
Major functions & features
Anemometer sensor use magnetic sensor measuring principle.Sensor data collected with high precision and reliability.Special design for heavy equipment, modern design, self-adjusting vertical angle.Wind speed measurement with wide range, low wind speed start.Wind speed sensor use metal enclosure, corrosion resistant and strong anti-wind capabilityWind cup stainless steel, can be used in harsh conditions.Compact sensor design, set wind speed measurement, heating device in one, easy installation and maintenance.Sensor fault-tolerant design, sensor will not be damaged even wrong wiring.Surge protection design.Wide supply voltage range.Specification:
Operating voltage | VCC=DC12V-DC30V | Range | 0.5-50m/s |
Start speed | 0.5m/s | Anti-wind level | >70 m/s |
Accuracy | ±0.5 m/s (<5m/s) Measuring vale±3% (≥5 m/s) | Heating type | Automatic |
Heating voltage | DC24V±6V | Heating power | ≤50W |
Surge protection | 4KV/2KA | ESD protection | 15KV |
| |||
Ambient temperature | -40°C~+70°C | Relative humidity | 0%~99% |
Body material | Aluminum alloy/ Fluorocarbon coating | Ingress protection | IP65 |
Wind cup material | Stainless Steel 304 | Bearing material | Stainless Steel 440C |
Weight | FA13xB=2.5KG | ||
Signal and model selection:
Model | Signal output |
FA131B |
UART :Universal Asynchronous Receiver/Transmitter,baud rate 300, eight bit data, no parity, one stop bit, signal range 0~VCC. Match Nanhua FA101C or FA130C display panel. |
FA133B | 4~20mA three-wire current loop, load resistance≤500Ω |
FA135B | NPN pulse signal, 0.5m/s=2Hz, 50m/s=573Hz V[m/s]=0.08669×f[Hz]+0.32 |
crane anemometer
