Special design for tyre crane,bridge testing vehicle etc large mechanical equipments,IP65.

Major functions and features

• Self-adjusting vertical angle.

• Wind Cup and the main body use engineering plastics and alloys, high mechanical strength, strong wind resistance, unique bending design of cantilever, heavy load capability.

• Easy to install, free testing, applicable to different working environment

Specification

Supply voltage	DC12V~DC28V		Wind speed measuring range	0~36m/s
Measurement tolerance	(0.4+0.05 actual wind speed)m/s		Toggle speed	<1m/s
Anti-wind strength	Max. wind resistance:≥60m/s		Refreshing frequency	1Hz
Sensor output	4mA~20mA; RL<400Ω
Ambient temperature	-40~ +85(degree Celsius)	IP protection			IP65
Humidity	10% ~ 95% (no coagulation)	Material			Sensor :PC+ABS Balancer: steel
Weight	2.5kg

Installation and operation

Communication cable:

Use the cable with single core diameter more than 0.5 mm(communication distance within 1000m),3 cores shield cable,and if with longer distance please choose the wider diameter cable.

Installation: 

Install the wind sensor in the high point, to avoid the influence of wind speed measurement block material, and fix the sensor flange to the position lock with four M6 hex screws

Note that the actual installation must be based on the usage of the equipment boom working angle range, choose a suitable installation location to keep working condition, maintainthe sensor angle in its vertical state to ensure the accuracy of measurement of wind speed and reduce the impact of vibration equipment damage.

Trouble shooting

If the anemometer does not work, please check:

1, the power is DC24V ± 6;

2, PLC input resistance is less than 400Ω.

Notice

•  Please read this instruction manual carefully before use the products.

•  Please make sure connect well before power on.

•  Any question please contact us.

crane anemometer