35W Switching power supply(dc power adapter), China 35W Switching power supply(dc power adapter) Supplier,Factory

35W Switching power supply(dc power adapter)

Shenzhen Mulview Technology Co., Limited [China]

Detailed Product Description

Switching power supply, applies to the automated control domain
Low price and high reliability
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With Short-circuit and overload protection
100% full-load burning test
Installed with EMI filter, minimum wave.
Conform to EN60950 GB4943 UL60950nSafety Standards
2 years warranty

35W series switching power supply

Model	S-35-5	S-35-12	S-35-15	S-35-24
DC output voltage	5V	12V	15V	24V
Output voltage errorNote2	±2%	±1%	±1%	±1%
Rated output current	7A	3A	2.4A	1.5A
Output current rage	0-7A	0-3A	0-2.4A	0-1.5A
Wave and noise(Note 3	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(Note 4	±0.5%	±0.5%	±0.5%	±0.5%
Load stability (Note 5	±1%	±0.5%	±0.5%	±0.5%
DC output power	35W	36W	36W	36W
Efficiency	70%	76%	78%	78%
Adjustable range for DC voltage	+10,-5%	+10%	+10%	+10%
AC input voltage range	86-132VAC/170-264VACSelected by switch47-63Hz240-370VDC
Input current	0.5A/115V 0.25A/230A
AC Inrush current	Cold-start current15A/115V 30A/230V
Leakage current	<0.5mA/240VAC
Overload protection	105%-150%Type:Foldback:current limiting reset: auto recovery
Temperature coefficient	±0.03%/0-50
Setup rise hold up time	200ms,100ms,30ms
Vibration	10-500HZ,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage	Input and output internal1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC
Isolation resistance	Input and output internal: Input and enclosure, Output and enclosure500VDC/100MΩ
Working temperature and humidity	-10~+60Refer to output derating curve,20%~90%RH
Store temperature and humidity	-20~+85.10%~95%RH
Overall dimension	129×98×38mm
Weight	0.4Kgs
Safety standards	Meet UL 1012 requirement(Not apply for the mark)
EMC standards	Meet FCC part15J Conduction class B
Note 1.The testing condition for the parameter above is :230VAC input, rated load,2570% RH.Humidity. 2. Error.include the setting error, line stability and load stability. (Note: 5). 3.Wave test: adopting "A12"double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: the load is from 0% to 100%.