Differencial Pressure Transmitter Pressure Range: 0-1000Pa Overload capacity:1bar Burst pressure: 5bar 0-10 Vdc/4-20mA

FUNCTION

MP  serious  pressure  sensors  can  be  used  to  test  air  non-aggressive  gaseous  wiith high accutracy. The sensor also provide the temperature compensation function.The temperature is test by the temprature sensor which attached on the chip. Measured data will be transfered to the compensation circuit on the chip to compensate temperature. No need outside temperature compensation. Output: 0-10V or 4-20mA.

GENERAL

The differential pressure transmitters of the MP series are used for measuring differential pressure, positive pressure, and vacuum. The transmitters are suitable for:

 

air-conditioning,building automation,environmental protection,valve and flap control,filter and blower monitoring,fluid and level monitoring, andcontrol of air flows.

FEATURES

Monitoring non-aggressive gaseous Up to 1bar overload capacityRugged design; protection class IP54Easy installation and wiring connectionsinge adjustable by jumper

SPECIFICATION

 

Power supply	18~24~30 V/DC; 50/60 Hz
Output signal	0~10 Vdc/4-20mA
Pressure media	Air, non-aggressive gases
Working temperature	-10~50 degree C
Linearity and hysteresis error	1.0% of FS
Storage temperature	-10~70 degree C
Humidity	0~95% rh, non-condensing
MP-TX	1.0% of FS per year
Repetition	0.2% of FS Position dependence
Accurracy	0.02% of FS
Response time	1 s (switchable to 100 ms)
Process connection	6 mm hose pipe
Electrical connection	Screw terminal block for wire up to 1.5 mm²
Housing Matial	ABS and POM
Cable entry	M20x1.5
Protection Class	IP54 as per EN60529
Weight	about130 g

Differential Pressure Transmitters 0-1000Pa