Monitoring gaseous, non-aggressive media Piezo-resistive Pressure Transmitter Up to 40 kPa overload capacity
Pressure Transmitter
FEATURES
Monitoring gaseous, non-aggressive media
Piezo-resistive pressure transducer
Up to 40 kPa overload capacity
Models with display (MP-T1-D)
Rugged design; protection class IP54
Easy installation and wiring connection
singe adjustable by jumper
Response time adjustable by jumper
GENERAL
The differential pressure transmitters of the DPT series are
used for measuring differential pressure, positive pressure, and vacuum. The transmitters are suitable for:
air-conditioning,
building automation,
environmental protection,
valve and flap control,
filter and blower monitoring,
fluid and level monitoring, and
control of air flows.
NOTE: These sensors are not suitable for use in installations under periodic inspection by the GERMAN. Food and Drug Administration.
SPECIFICATION
Supply voltage 18...24...30 Vac; 50/60 Hz or 16...24...32 Vdc
Output signal 0...10 Vdc, three-wire
Pressure medium Air, non-aggressive gases
Working temperature 0...50 °C Linearity and hysteresis error ≤ ± 1.0% of FS
Temperature error at 0...50°C See section "Models"
Storage temperature -10...+70 °C
Humidity 0...95% rh, non-condensing
Long-term stability, typical
MP-TX ≤ ± 2.5% of FS per year Repetition accuracy ≤ ± 0.2% of FS
Position dependence ≤ ± 0.02% of FS
Response time 1 s (switchable to 100 ms) Process connection 6 mm hose pipe
Electrical connection Screw terminal block for wire
up to 1.5 mm²
Housing material ABS and POM
Cable entry M20x1.5 (polyamide)
Protection class IP54 as per EN60529
EMV EN60770, EN61326
Weight approx. 130 g
MODEL:
Order nr. | Pressure range | Overload capacity | Burst pressure |
MP-T1 | 0...+100 Pa/0...+250 Pa/0...+500 Pa | 1 bar | 5 bar |
MP-T2 | 0...+1000 Pa | 1 bar | 5 bar |
MP-T3 | 0...+2000 Pa | 1 bar | 5 bar |
2-Wire Differential Pressure Transmitter
