This is PVC pipe machine is suitable for producing PVC pipe from 200-400, and the extruder is paraelle twin screw extruder.
200-400 PVC Pipe machine
1. Parallel twin-screw extruder SJP107/26
Screw diameter | 107mm |
L/D | 26:1 |
Motor power | 90kw |
Rotating speed of screw | 1-35rpm |
Heating power | 48kw |
Extrusion capacity | 00-600kg/h |
Center height | 1100mm |
Main Extruder speed adjusting way | Frequency conversion(by Fuji inverter) |
Feeding extruder speed adjusting way | Frequency conversion (by Fuji inverter) |
Barrel temperature adjusting way | Heating: cast aluminum heater Cooling: 6 sections cooling by air |
Main electric component | SIEMENS/Schneider |
Temperature controller | OMRON/RKC |
Weight | 6000kg |
Material of screw and barrel | 38CrMoAlA Azotizing on surface 0.4~0.7mm Rigidity: above 700 HV |
Drive way | Hard tooth face gearbox |
Vacuum exhaust system | 2.2 kw watering |
2. Die head and mould
Specification | 200-400 |
Material | 40Cr |
Heating zone Qty | 12 |
calibrators | Cast copper |
3. Stainless steel vacuum calibration tank
Power of vacuum pump motor | 7.5kw x 2 water-ring vacuum pump |
Power of water pump | 5.5kw x 2 |
Tank back-forth movement device | 1.5kw |
Material | Stainless steel(5mm) |
Position and method of cooling spray | 4 sets spray |
Material and quantity of muzzle | ABS x 250 pcs. |
Main electric component | SIEMENS/Schneider |
Switches | DELIXI |
Dimension | 6000 x1200 x 1600mm |
Effective calibration diameter range | 200-400mm |
Sealing unit for each diameter (Including cover, silicon rubber sealing and holder) | |
Fitted with water level control unit. | |
4. Water cooling tank
Power of water pump | 5.5kw |
Material | Fiber glass |
Position and method of cooling spray | 4 sets spray |
Material and quantity of muzzle | ABS x 250 pcs. |
Main electric component | SIEMENS/Schneider |
Switches | DELIXI |
Dimension | 6000 x1200 x 1600mm |
Effective calibration diameter range | 200-400mm |
5. 6-paw Caterpillar haul-off machine
Suitable scope | 200-400 |
Quantity of haul-off caterpillar | 6 |
Haul-off caterpillars position adjustment | By pneumatic |
Speed of traction | 0.1-3m/min |
Power of haul-off motor | 0.75kw*6+1.1kw |
Effective length of pedrail | 2000mm |
Timing method of haul-off motor | Frequency conversion(Fuji/ABB) |
Main electric component | SIEMENS/Schneider |
Switches | DELIXI |
Central height | 1100mm |
Overall size | 3500×2000×2000 |
Pressure of pressed air | ≥0.6MPa |
6. Planetary cutter
Suitable scope | 200-400 |
Power of cutting motor | 4kw |
Rotary motor | 1.1kw |
Fan motor | 1.5kw |
Air pressure | ≥0.6MPa |
Cutting way | Saw |
Dimension | 3200×1600×2000mm |
Main electric component | SIEMENS |
Switches | DELIXI |
SIEMENS PLC control system | |
With chamfering system | |
Pipe length control system | |
PVC pipe machine
