Tube Filling Machine Rotech Tube Filling Machine is widely used in pharmaceutical industry
Tube Filling Machine
Design and Manufacturing According to FDA&cGMP Standard
DESCRIPTION
RGF-80Z-C is applicable to plastic composite tubes and aluminum plastic composite tubes. The machine is able to make the final product by filling viscous like ointment,cream,Gel into the bottom of the tube and folding the tail and printing.
FEATURES
1. The mechanical linkage photo sensor precision tolerrance is less than 0.2mm.The chromatic aberration scope between tube and eye mark is reduced.2. Photo-electronic,electric, pneumatic integrative control is applied with the machine.No tube,no filling .It gives an alarm when low pressure occurs.The machine stops automatically if tube error or open the safety door.3. Three-layer jacket instant heater with inside air heating,It won't damage the pattern on outer wall of tube and achieves firm and beautiful sealing effect.
TECHNICAL SPECIFICATION
RGF-80Z-C | |||||||||
| Configuration Standard | Technical Parameters | Remarks | ||||||
n Power, Main Motor etc. | |||||||||
Power Supply | 50Hz/380V 3P | ||||||||
Main Motor | 1.5KW | ||||||||
Vacuum Pump | 0.4KW | ||||||||
Jacket Barrel Blending Power | 0.75 KW | ||||||||
n Production Capacity | |||||||||
Operation Speed | 80/min(max) | ||||||||
Filling Range | 3-200ml | ||||||||
Suitable Tube Length | 50-200mm | ||||||||
Suitable Tube Diameter | 10-40mm | ||||||||
n Pneumatic Control System | |||||||||
Pneumatic Component | SMC +AIRTAC | ||||||||
Working Pressure | 0.6MPa | ||||||||
n Suitable Packing Material & Other Devices | |||||||||
Suitable Packing Material | Aluminum tubes | ||||||||
Obliquely Hanging Lining-up Tube Storehouse | Speed Adjustable | ||||||||
Tube Storehouse Adjustment | Handwheel unitary adjustment | ||||||||
Material contacting with filling material | 316L Stainless Steel | ||||||||
Tube Filling & Sealing Machine
