interface converter SNMP/WEB Console, E1 frame and unframe, 75/120ohm optical standalone and rack mount module optional

8E1 to Ethernet Protocol Converter  

Overview:  

Spacecom 8×E1/10/100BaseT series are user-end accessing equipments developed and produced with Spacecoms self-developed special-purpose integrated circuits. They are used for Ethernet data that takes super-large special-purpose integrated circuits as the core to realize user data accessing via E1 transmission network, so that Ethernet data can be transmitted over multiple E1s, breaking the bandwidth restriction of single E1. They can easily leverage the rich existing E1 resources in the public network to build broadband Ethernet data network rapidly. 

Spacecom 8×E1/10/100BaseT series has no special requirements for E1 channel, and can automatically tolerate errors from E1 . Even if some E1 channels fail, only the equipments data throughput can be reduced, no interruption of the transmission of data. They can be flexibly configured and easily maintained, and at the same time can provide complete network management capabilities.  

Feature:Adopt large-scale chips ,simple circuit, low power consumption and high reliability Provide 1~2 10/100M Base-T ports, support 10/100M full duplex and half duplex and    support auto-negotiation mechanism; Provide a same kind of E1 configure, E1 interface impedance support 75Ωand 120Ω E1 route way support inter BERT (Bit Error Rate Test) function; E1 loop return test available; Support 802.1p PRI function; Support flux control function which based on 802.3x; Support transparent transmission of VLAN Ethernet frames; Support a management interface, and setup function of equipment neatly; Has complete warning and status indication; Support multi-power supply environmentTech Specifications Electric Indexes of E1 Interface:Nominal rate: 2048Kbps, tolerance: ±50ppm Interface code type: HDB3 Interface impedance: 75Ω (imbalance) or 120Ω (balance); Electric features of the digital interface: compliant with ITU-TG.703 recommendation Features of jitter transfer: compliant with ITU-TG.823 recommendation Input jitter: compliant with ITU-TG.823 Electric level: ±2.37V±10% or ±3.00V±10% Interface connector: BNC, CC4 (75Ω) or RJ45 (120Ω) Interface Indexes:Interface: 10/100Base-Tx Interface rules: compliant with IEEE-802.3u standard Interface rate: 10/100M self-adaptable Interface connector: RJ-45Management InterfaceInterface mode: RS-232 Interface level: RS-232 level Interface connector: RJ-45 Baud rate of management interface: 57600bit/sPower Supply:DC voltage: -48VDC, Tolerance range: -36V~-72V, Power supply ripple: ≤240mVp-p AC voltage: 220VAC±20% 50HZ, Tolerance range: 90V~264V, Power consumption: ≤10W Ambient temperature: 0~45     Relative humidity: ≤90% (at 35) Atmosphere pressure: 86-106Kpa

8E1 to Ethernet Interface Converter