This telecommunication equipment is used in optical network to back-up optical links and equipments.
Introduction
SPC-OPS-1 Optical Line Protect Switch is an auto-switch equipment (for 1+1 protection) used in optical network to back-up optical links and equipments, such as EDFAs, transmitters, etc. It can automatically switch to backup line to maintain the optical signal transmission when main line breaks down at any time, and send out alarm signals .
Features
Capable of Automatic switching, manual switching and remote switchingAuto-switching time less than 25 msLatched when power offStandard SNMP network management function, supporting Web browserLED indicators at front panel, indicating the status of power supply, mode, optical inputs and outputsWide operating optical power range (-45dBm ~ +15dBm)Low insertion lossPower supply redundancy
Specifications
Parameters | Min. | Typ. | Max. | |
Operating Wavelength (nm) | 1310±40 or 1550±40 | |||
Return Loss (dB) | 55 | 60 |
| |
Polarization Dependent Loss (dB) |
| 0.06 | 0.10 | |
Repeatability (dB) |
| 0.02 | 0.05 | |
Isolation (dB) | 50 | 60 |
| |
Insertion Loss (dB) | TX ® T1 (T2) |
|
| 4.0 |
R1 (R2) ® RX |
|
| 1.3 | |
Monitor Optical Power Range (dBm) | -45 |
| 15 | |
Monitor Optical Power Accuracy (dB) |
|
| ±0.5 | |
Monitor Optical Power Resolution (dB) | 0.1 |
|
| |
Switching Time (ms) |
|
| 25 | |
Operating Temperature (°C) | 0 |
| 50 | |
Storage Temperature (°C) | -25 |
| 65 | |
Switching Type | Latched when power off | |||
Switching Threshold | Customer defined | |||
Power Supply | -48VDC or 220VAC | |||
Switching Mode | Auto,Manual,Remote | |||
Network Management Interface | RJ45 | |||
Network Management Protocol | SNMP1.0 with RJ45 port | |||
In/Out Connector | SC/APC (or customer defined) | |||
Dimension | 1RU Rack Mounted, 430´300´44 (mm) | |||
telecommunication equipment
