Detailed Product Description
Detail information of the drywall metal stud roll forming machine as follows:
The material of baking finish stud is baked galvanized steel plate after heat treatment on the surface. The thickness of the plate is 0.3 - 0.35mm. It is white, with dummy surface and smooth texture.
It is used in decoration of ceilings of hotels, business offices, office buildings, exhibition centers and houses. After jointly used with sound insulation plate, baking finish stud can reach excellent effect of sound insulation. It is easy to install and operate.
1 Main technical parameter
1 Raw Material : hot dip galvanization metal strip
2 The thickness of the raw material: 0.4-0.7mm
3 The width of the feed-in: 150mm
4 The inner diameter of the steel coil : 508-600mm
5 The outer diameter of the steel coil : 1200MM
6 Molding main electric energy: electromagnetism timing electricity energy: 7.5kw
7 Working pressure 380v 50hz control pressure 24v
8 The molding main electric consist of 12 axes
9 The molding mainframe use jointing steel structure
10 Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )
11 Roller use 45# steel, confection disposal, the hardness of the confection is HB250-280.surface grind,chop process. The outer diameter is 60mm
12 Roller mould use axletree steel Gcr15 salt bath quench.hardness is HRC58-62
13 The fast production speed 20M-30M/ minute
14 The max error of the molding keel is 0.30mm
15 Feed-in material way : from left to right
2 cutting equipment
16 hydraulic prssure qua power switch off
17 The ability of the cutting 6tons
18 Hydraulic pressure system pressure: 12Mpa. Work pressure 5Mpa
19 The form of the cutting: 45 degree sloping chop
20 cutting scrap 0mm
21 The cutting machine frame by steel structure jointing
22 The cutting mould by expert mould steel CR12, salt bath quench hardness HRC60-62
23 Fix ruler length error <= 1.5mm
3 Feed-in machine
24 Steel structure frame
25 By rise and tighten style
26 Max bear the weight of machine is 2tons
4 The whole production line
Feed-in machine --- material right/left guide --- correct calm machine molding mainframe roll mould ---finished product correct straight machine --- hydraulic prssure cutting equipment( hydraulic pressure station) ----- track cutting stepped vehicle sever mould ---- received frame of material --- electric control box
PRODUCTION LINE OF THE MACHINE
1 Feed-in machine one set
2Molding mail electric one set ( including material right/left guide, correct calm machine, finished product correct straight machine)
3Rolling mould 3 sets
4 Cutting mould 3sets
5Hydraulic station 1 set
6 track cutting stepped vehicle 1 set
7 received frame of material
8 electric control box 1 set
Technology service period: the GUARANTEE of the equipment is one year,during this period,for the reason of machine itself cause the quality problem,the seller need to supply technic service,change the parts free.if excess the quarantee period,the buyer need to buy the parts within 5 years,the seller should supply at the lowest labour price.
Meas of the machine:
Main electric L 5000mm X W 1650mm X H 1250mm
Length of the production line L 14500mm×W 1650mm X H 1250mm
The volume of production L 20000mm X W 4000mm
