Detailed Product Description
|
1. Product nameThin-Wall Angle Steel Production Line
2. Wall Stud and Track 2.53.545.56The product specifications of this equipment can be completed:Wall Stud and Track 2.53.545.563.
3 Raw material: galvanized steel sheet/ ordinary plate/ high-strength low-alloy galvanized steel sheet
4 Thickness: 0.9mm 1.6mm; feed width : 100-400mm
5 . Production processTraction uncoil - Automated follow-punching - Roll Forming Straightening Automated follow-off after forming - finished
6 .Equipment performance
1)Continuously automated production
2) Flow-forming transmission: high-strength gear. Power output: servo motor configuration MTJ spiral bevel gear reducer. Servo motor power is 7.5kw.
3)Production line speed: punching state during operation is 12M/min, non-punching operation speed is 24M/min
4)Hydraulic automatic follow-punching: controlled by the servo motor; Ball screw drive. Linear guide runningDistance punching can be arbitrary adjustment; Adjustment range: 300 750mm.Punching quantity can be set; distance error of plus or minor is 2.0mm5)Hydraulic automatic follow-cutting: controlled by the servo motor; Ball screw drive, linear guide running. Workpiece can be arbitrary adjustment; Lenghth error of plus or minor is 2.0mm.
7.Full set of the equipment include the follow section
A. One-head uncoiler one set( for galvanized coil) feeding:1500kg, galvanized coil: OD 1200mm,ID 480-510mm. plate width in accordance with the products. Driven by the above host. Description: the ID of the coil plate can be adjustment through the regulation of the central nut.
B . Cold forming host one set.Forming Road: 14, including feed of traction and Straightening UnitsHost has the high precision welding, processing and assembly.Drive motor: 7.5kw servo motor configuration MTJ spiral bevel gear gearbox.
C. Molding roller: one set, can produce all the size through the regulation of the distance.
D. Hydraulic automated punching: one set
E. Hydraulic automated follow-cutting equipment: one set
F. 4meters length feed out rack one piece
G. Electrical control box 1setSeparate procedures for operation panel and host connectivity
H. Punching mould 1setCutting mould 10sets
