Box Beam Reinforcing Plate Assembling Machine (ISO, Box Beam Welding)
Detailed Product Description
This is the special machine used to assemble and weld the middle reinforcing plate In the middle of box beam. When working please overturn the working table to the Horizontal position, then load the workpiece on the platform. Turn on gas cylinder, The piston of gas cylinder will up-press to push the clamping bar to be turning To clamp the workpiece. The clamping device and moving plate can be moved and Adjusted on the working platform, so as to meet the length requirement of clamped Workpiece. Then start overturning, when overturn to a certain angle that is Suitable for welding, then can carry out welding. After finish welding on one side, Then overturn opposite to another surface to weld another welding seam. During The overturning, this machine has very good positioning and self-lock function. After welding finish then can overturn the working table to the horizontal position, Release air cylinder then take down the workpiece. H beam, I beam Technical data: box beam dimension: 300~1200mm box beam thickness: 16 ~ 60mm Air pressure: 0.4 ~ 0.8mpa, 0.3cbm Overturning speed: 1.5r/min Motor power: 0.75kW