HPF-850HP split tube furnace
Detailed Product Description
Specifications:
| Furnace casing | | Double layer steel casing with air cooling. Built in thermostat to control Cooling running automatically when case > 55oC |
| Power | | |
| | |
| oC | |
| oC /min | |
| | - Stainless Steel (SS304 body / SS316 Cap, Made in USA)
- 2-1/2" O.D x 1-1/2" I.D. x 40" Length
- Please click picture below to see detail drawing of pressure vessel
|
| | |
| Constant temperature | mm | 150 (+/-1oC) , 200 (+/-1oC) |
| | - PID automatic control with 30 segments programmable
- LED digital display with protection Over temperature and thermal couple broken
|
| oC | |
| Pressure Fitting | | - Two stainless steel ( SS316) flanges weld to tube with double high temperature silicone O-ring ( 300oC Max. )
- Two Aluminum heat radiators are installed in front of flange to keep flange below 100oC
- Two high pressure valves are installed with flanges
- One Pressure meter installed to one of valve
- One pressure safety valve (100 PSI) is installed in one end of tube
|
| | - Warning: Must limit Workign temperature under a certain pressure limited by vessel material strength
- 1800 PSI max at 600 oC (124 bar )
- 750 PSI max at 650oC (51 bar)
- 450 PSI max. at 700oC (31 bar)
- 150 PSI max. at 800 oC (10 bar )
- Never use pressure vessel above 800oC
|
| | |
| | |
| | |
| | |
| | |
| | |
| Warranty | | one year limited on all electronic parts, not including quartz tube |
| Cautions | | - Please click to see our typical temperature profile calibration result at various temperature.
- From 7/15/08, MTI calibrate each each furnace by , and pre-set temperature off ( SC value ) in controller before shipping.
|
