Use famous CNC system: FANUC, SIEMENS, etc; Max cutting dia.: 800mm, X/Z axis trevel: 600/800mm; ISO9001:2008; Manufacture. Features
This machine uses the domestic & foreign advanced technologies, computerized module design with brand-new structure. The machine needn’t to wait for warming, which can run once start up. The precision and stability is good, cost performance is high, does not take up much area. It is easy to install it and save labor force. One-time to clamp, that can realize most or all of processing requirements of complex parts, especially to process multispecies and medium and low volume.
Patent number: 200920093170.3
Technical parameter
| Type | UNIT | VT 800 | |
| Capability | Max. swing dia. | mm | Φ1000 |
| Max. cutting dia. | mm | Φ800 | |
| Max. cutting height | mm | 800 | |
| Max. bearing weight | kg | 3000 | |
| Spindle | Motor power kw | kw | 18.5kw/25hz |
| Torque force nm | nm | 8600 | |
| Drive ratio (belt) | \ | ||
| (gear box) | 1:12 | ||
| Range of rotation speed(belt) | \ | ||
| (gear box) | 5-300 | ||
| Front bearing bore dia. | mm | Φ240 | |
| Type of spindle ends | A2-15 | ||
| Chuck dia. | mm | Φ500 | |
| Feed | X-axis travel | mm | -50/600 |
| Z-axis travel | mm | 800 | |
| X/Z rapid traverse speed | m/min | 8/10 | |
| Spindle end to tool end | mm | 150-950 | |
| Accuracy | Position accuracy | mm | ±0.008 |
| Repeatability position accuracy | mm | ±0.005 | |
| Tool post | Type | vertical 4 stations | |
| Center height | mm | 125 | |
| Dia. of edge | mm | 300 | |
| standard tool shank's dia. | mm | 32×32 | |
| standard boring tool shank's dia. | mm | Φ50 | |
| Power | Power | v | 380V50HZ |
| Total power | kw | 25 | |
| Outlook | L | mm | 2400 |
| W | mm | 3000 | |
| H | mm | 3400 | |
| Weight | kg | 12000 |
Physical Features
Lathe bed design is rib plate multi-sections changing construction. It adopts anti-seismic filling material inside the lathe bed, it can increase the rigidity and aseismicity of lathe.X guide adopts multi-guide exceed locating mode, it can increase the rigidity of lathe and the precision is high.Spindle bear adopts two-front and four-back structure, it can increase the rigidity and anti-seismicity of spindle, the precision is high.The diameter of lead screw is increased 1.5 to 2 times, so that it increases the driving force and enhances cutting rigidity.Lathe adopts advanced pre-positive chip removal, it doesn’t destroy the whole rigidity of lathe. You can also add automatic chip removal device.Lathe adopts fully enclosure hood, it is very elegant.It adopts automatic lubrication device without maintenance.
Applied range
To process various plates, shells and minor axis parts. Such as gear, bear, brake disc, flywheel, wheel hub, flange plate, valve, pump body.,etc.
Standard Configurations
GSK 980TDb CNC system
Fully enclosure hood
Three-color alarm lamp
Frequency conversion spindle motor
Motor-driven cutter / hydraulic cutter
Air chuck / hydraulic chuck
Chip removal water box
Automatic lubrication system
Heat exchanger
Electronic hand wheel
Tools & tool box
High-Accuracy CNC Vertical lathes VT800
