co2 laser power supply Our power supplies have powerful fetures. Good integrity Advanced technology Easy control safety

Lastest Modal 60w CO2 laser power supply

(We also stock 30w ,40w ,60W,80W,100W,150w Please buy it in our store or contact us to buy)

Please see the following pictureS show you how to connect

Introduction

This high frequency CO2 laser power supply is dedicated for CO2 laser device, with high efficiency, highfrequency and short response time. The compact and handy power supply has excellent compatibility with laser device and can be directly connected. With this power supply, laser device will be easily started up and well operated with higher conversion efficiency and longer expectation of life. Used with some specific laser device, peak output power of the laser would be up to 70W and average output power is 60W.

The power is adjustable through it's TTL control or by a 5K variable resistor. It supports any CO2 laser for up to 60Watt. Small design with an excellence PWM control circutry

Technical Parameters

Input	Input	AC220V or AC110V
	AC Frequency	47-440Hz
	Cold surge current	≤60A(AC220V input)	≤30A(AC110V input)
	Leak current	≤0.7mA(AC220V input)	0.4mA(AC220V input)
Output	Max output Voltage	DC 35KV
	Max Output current	DC 23mA
Efficiency	when≤90%load down
Time no-failure	≤10000 hours
Response speed	≤1ms
Control port	TLL electricity level switch control, valid electricity has high/low level choices
Vollage-resisting	Input-Output ,input-machine hull: 1500V 10mA 60s AC output cathode and machine hull connection
Protection	Can be used an opening way in a short time
Usage environment	Work temperature:(-10-40)°C.Relative humidity:≤90%
Cooling Type	The compuisive air cooling
size	L×W×H=210×160×95(mm)

Features

High response speed and effect.Dramatically lengthen the service life of laser.Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.Application:acrylic sculpture,cut:fabric sculpture cut:rubber sheet sculpture,cut:etc

How to use

Please refer to the two pictures show you how to connect as follows

Item Units and Pictures

 

FOR ALL OF OUR CLIENTSNOTICE: There are many new brand name of similar item in the market recently, although their price are really cheap, but the quality of their products are also terrible: 1. That factory only produce as a lower price as they can, they won't care about the quality.All our item is pass the ISO9001 quality certification 2. Have visit and purchase the item samples from some other supplier, many samples are in bad quality. After compare samples again and again from different supplier, finally we provide this top-quality item for you at lowest price. 3. You can purchase a high quality and safety machine, but please don't waste the money for a cheaper but a low quality machines. We only sell top-quality item. Base on the top-quality, then we will beat our price as lowest on Alibaba. 4. We keep a good relationship with the supplier, so that we can get the stable and reliable stock for our client. 5. We only sale the top-quality machine, we can provide the reasonable price since we have fight with the supplier as a lowest cost as we can. Warranty Directly Manufacturer Fully Guarantee For 24 months.Technical Support We have a professinal technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.

co2 laser power supply 60w for laser cutter