co2 laser power supply 1.Be applicable to 40W and 30W laser tube. 2.Fast response speed 3.Both 0-5V analog signal and PWM
Lastest Modal 40w co2 laser power supply
(We also stock 30w,40w,60W,80W,100W Please buy it in our store or contact us to buy)
Please see the following pictures show you how to connect
Introduction
This high frequency CO2 laser power supply is dedicated for CO2 laser device, with high efficiency, high frequency and short response time. The compact and handy power supply has excellent compatibility with laser device and can be directly connected. With this power supply, laser device will be easily started up and well operated with higher conversion efficiency and longer expectation of life. Used with some specific laser device, peak output power of the laser would be up to 50W and average output power is 40W.
The power is adjustable through it's TTL control or by a 5K variable resistor. It support any CO2 laser for up to 40Watt. Small design with excellence PWM control circutry.
Technical Parameters
Input | Input Voltage | AC220V or AC110V(to be specified when placing order) | |
AC frequency | 47—440HZ | ||
Cold Surge Current | ≤60A(AC220V Input) | ≤30A(AC110 Input) | |
Current Leakage | ≤0.7mA(AC220V Input) | ≤0.4mA(AC110V Input) | |
Output | Maximum Input Voltage | DC 25KV | |
Maximum Output Current | DC 20mA | ||
Efficiency | ≥90%(full load) | ||
Mean Time Between Failure (MTBF) | ≥10000H | ||
Response Speed | ≤1ms(from the switch Signal is given to the output current up to 90% of the setting current) | ||
Control Interface | TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) | ||
Withstand Voltage | Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. | ||
Protection | can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell) | ||
Environment | Operating Temperature: -10~40°C),Relative Humidity (RH)≤90% | ||
Cooling Way | Force-Air Cooling (FAC) | ||
Dimension | L×W×H=167*144*97(mm) | ||
Features
High response speed and effect.Dramatically lengthen the service life of laser.Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.Application:acrylic sculpture,cut:fabric sculpture cut:rubber sheet sculpture,cut:etcHow to use
Please refer to the two pictures show you how to connect as follows.
Item Units and Pictures
FOR ALL OF OUR CLIENTSNOTICE: There are many new brand name of similar item in the market recently, although their price are really cheap, but the quality of their products are also terrible: 1. That factory only produce as a lower price as they can, they won't care about the quality.All our item is pass the ISO9001 quality certification 2. Have visit and purchase the item samples from some other supplier, many samples are in bad quality. After compare samples again and again from different supplier, finally we provide this top-quality item for you at lowest price. 3. You can purchase a high quality and safety machine, but please don't waste the money for a cheaper but a low quality machines. We only sell top-quality item. Base on the top-quality, then we will beat our price as lowest on Alibaba. 4. We keep a good relationship with the supplier, so that we can get the stable and reliable stock for our client. 5. We only sale the top-quality machine, we can provide the reasonable price since we have fight with the supplier as a lowest cost as we can. Warranty Directly Manufacturer Fully Guarantee For 24 months.Technical Support We have a professinal technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
Best selling 40w co2 laser power
