1) Ipe engineered flooring 2) 7 time UV coating /traffert brand 3) Homag cut machine 4) CE certificate available
Ipe engineered flooring
| Speices | Ipe + poplar and other hardwood mixed plywood |
| Size | 310-1820mmx123x15/4mm |
| Average length | 700mm |
| Constuction | Ipe top layer 4mm,base material plywood 11mm |
| Grade | Selected/AB |
| Joint system | T and G |
| Joint system cutter | Homag cut machine |
| Bevel | 0.5mm micro bevel ( can be according to clients requirement) |
| Surface effect | UV lacqured 7 times coating,Traffert brand |
| Certificate | CE certificate available,Carbo certificate available |
| Moisture | 8-10 % |
The picture is as following
Technical data
Pieces/pack | 8-12 pieces/carton |
Length | 1200mm, 900mm,1800mm,2200mm |
Width | +/- 0.15mm tolerance |
Thickness tolerance | +/- 0.2mm |
Top Veneer thickness tolerance | +/-0.2mm |
Height difference bewteen plans | Max 0.2mm, |
Squareness tolerance | Max 0.2mm |
Crook/ sweep | 0.2mm |
Bowing | Max 0.05% of board length |
Bevel | Four sides Bevel 0.5mm+/- 0.1mm |
Brushed effect | Refer to Sample |
T&G | According to confrimed sample |
Base material | Poplar / popar and birch plywood, other hardwood mixed plywood |
Moisture | 6%-9% |
FQA
What is engineered hardwood flooring?
A. Engineered hardwood flooring is a product made up of a core of hardwood, plywood or HDF and a top layer of hardwood veneer that is glued on the top surface of the core and is available in almost any hardwood species. The product thus has the natural characteristics of the selected wood species as opposed to a photographic layer. The “engineered” product has been designed to provide greater stability, particularly where moisture or heat pose problems for solid hardwood floors.
Q.What is the difference between a laminate, solid hardwood and an engineered hardwood floor
A. Laminate- core of product is typically made of High Density Fiber (HDF). The top layer is a photographic layer that should appear identical to the product it replicates, be it wood, vinyl, tile, etc. The product is generally 3/8” thick and is a floating install with tongue and groove glue less locking system which allows you to install and uninstall the floor several times if desired. This product is typically the least expensive. Solid Hardwood- the product is the solid natural wood species throughout the entire piece of flooring, typically with a tongue and groove installation. Good sanding and refinishing capabilities. The product is typically more expensive and has some limitations as to where it can be installed due to moisture issues.
Certificate
Homag cut machine
Joint system T &G
Traffert lacqured
Packing
15/4 Ipe Multilayer Engineered Wood Flooring
