fully automatically,low noise.good allocation.it can draw carbon wire,flux-cored wire,CO2 wire,s.s wire and so on.
Pretreatment line( up-draft pay-off rack+shucking brush derusting machine+boron coating +dryer)→LZ7/600 straight line drawing machine →600 trunk type take-up machine →annealing furnace →rotating pay-off rack →LZ6/400 straight line drawing machine→SG400(or SG300)
1.Equipment constituter(1) pretreatment work line up-draft pay-off rack + Shucking-brush derusting machine+boron coating+ tube type dryer
speed of treating line ≤2.5M/S
(2)LZ7/600 straight line drawing machine
(3)600 trunk type take up machine
(4 ) human machine interface display screen
(5) Whole set of electrical appliance control cabinet
2. Work areas: (1) input diameter 6.0 or 5.5 mm
(2)input strength 500Mpa
(3) input material low-carbon wire and so on
(4) output diameter 2.0--2.4mm
3. Drawing speed (1) max 10m/s (2) average 8m/s with output 8.5t/d (10h per day)
4. Water- air pressure (1) hydraulic pressure >0.2Mpa (2) barometric pressure>0.5Mpa
5. Electric motor standard (1)drawing machine 22KW AC motor
(2) wire coiling machine 15KW AC motor
6. Reel form(1) diameter 600mm
(2) Material ZG45 steel, surface spray finishing with carbonized tungsten alloy powder, hardness more than HRC60, surface roughness concentration less than 1.6Ra
(3) Service life 10000h
7. Reel cooling (1) inside small clearance space water cooling
(2) outside forced air cooling, quickly cool the wire surface
8. Stander form (1) main stander with steel structure welding
(2) Water, electric and gas operation board and meter to trig urgently
(3) Painted in blue or up to client
(4) With safety shield, can prevent the powder from smelling out.
9 Die box
the die box size be provided by the user
die box devided into two parts Lubrication powder cavity and cooling water cavity,die cooling using immersion flow water cooling,heating exchange efficiency is high,make the using time longer.
the direction of die box can be adjusted, if adjusted can be well fixed .
10 Tuning roller
Using Pneumatic anti-tension tuning,Sensor adopt angular displacement non-contact way, sensor imported from Germany, make the process of template matching wider, mould can be automatically compensated after wear and tear, and it is difficult to break line.
11 Tramission form
1--5 drive by tight-up V belt secondary drive
6--7 drive by tight-up V belt primary drive
14 take up machine:can take in the weight of wire250-350 KG max 1000kgs
low carbon wire drawing machine line
