Cable Manufacturing Equipment

the upward machine is used for making of oxygen-free copper rod with high-quality by adopting upward continuous casting process. 1.  UseageThis production line adopts the upward casting continuous technology, it is a specialized equipment to produce cast condition oxygen free...

Lay-up stranding machine 1. Stranding PVC and XLPE insulated cable. 2. lay up low-voltage power cable and armored cable.  Laying-up Machine Type CL-1600/1+1+3 I. Application The machine is suitable for laying-up and armouring of PVC and XLPE insulated low-voltage power...

Rod rewinder is for rerewinding the aluminum rod from casting& rolling line so as to make it regular and ease to transport. DesignationUnitDataDiameter of spoolmm9.5Max.Speed of spoolr/min59.4Max.Linear speed of (empty)spoolm/s2~3.5Size of Coil in...

The copper rod breakdown machine is used to draw 8mm ordinary copper rod into dia. 1.35mm~3.5mm wire. Inlet wire diameter: Ø8.0mmOutlet wire diameter: Ø1.35~3.5mmMax. Line speed: 25 m/s (hard wire)Drawing capstan diameter: Ø 450mmDrawing pass: 13 draft...

This device is used for winding and taking up wires onto the spool with high speed. Max. Speed 25m/sSpeed during bobbin changing: 8-12m/sSize, power and rotating speed of take-up motor: 2 x30KW/AC, n=3000r/minTraversing motor:1.5KW /ACMax. Width of traversing: 460mmTraversing...

This machine is used for drawing the ordinary aluminum rod or alloy aluminum rod from 9.5~12mm This machine is used to make aluminum rod or alloy aluminum rod, from 9.5~12mm down sized to 1.8~4.5mmMax. inlet dia. of ordinary al. rod:(The inlet diameter of 12mm is for 13 dies, and...

Any OEM or ODM projects are welcome. Connectors****** HDMI Connectors, USB Connectors, IEEE1394 Connectors, Micro USB Connectors, Mini USB Connectors, Adaptor, Mini DIN Connectors, SATA Connectors, RF SMA/SMB Connectors, RF F Connectors, RF TNC/BNC Connectors, RF MINI UHF Connectors, D-SUB Connectors, RCA plug & jack, Audio &...

6-35KV Rubber CV Line Specification Application The machine is used for making 6-35KV rubber cables by continuous curing process and extruding the single core, multi core and double-layer cable in one time then continuous curing. Main technical data Conductor type: Cat-2 (stranded conductor), Cat-5 (soft conductor), Cat-6...

200 PVC Wire Sheathing Line Application: The machine is suitable for hot extrusion of PVC, PE etc. plastic material, for insulation of conductor or sheathing of cables. Operation Direction: Facing the cross head, pay off is at left side, take up is at right side. Requirement for Production Line Working Environment: Temperature：0—45...

35KV CCV Line Application The line is designed for manufacturing 6～35 kV XLPE cable of compressed Cu. Al. stranded conductor. The pipe arrangement is of semi-catenary declination type, adopt XL pipes with short circuit heating, nitrogen as the medium and water cooling type. The finished XLPE cable measure up to GB/T 12706-2008...