Multi-wire drawing machine 1.Inlet: Max.1.8mm 2. Outlet: 0.15-0.4mm, 3. Material: Copper bare; tinned wire. 4. Speed: 28m/s
Inlet diameter(tensile strength) | : Max. 1.80mm (250N/mm2) for finish 0.40mm |
Outlet diameter | : Φ0.15-Φ0.40mm |
Number of produced wires | : 8 X copper bare i.e. copper tinned (1 Levels, with 8 wires) |
Drawing speed | : Max. 28 m/s |
Drawing passes | : Max. 22 |
Drawing rings | : 100mm with 8 grooves, For separate and parallel wire guidance Material: tungsten carbide or zirconium oxide |
Wire elongation | :11 x 25% / 5 x 19.44 % /3 x 9.04% three quick die change adjustable |
Drawing dies | : φ max. 28mm alternatively φ = max. 25.4 mm max. 12 mm thickness |
Compressed air supply | : 6 bar overpressure (7 x 105 Pa), water- and oil free |
Bobbin | : DIN 630 ( Drawing will be provided by users) |
Operation direction | : from left to right |
Noise level | :< 85 dbA (Except for main motor ) |
Production efficiency | : 8 X φ 0.150mm at v = 28.0m/s 8 X φ 0.203 mm at v = 25.0m/s 8 X φ 0.250 mm at v = 23.0m/s 8 X φ 0.300 mm at v = 15.0m/s 8 X φ 0.400mm at v = 12.0m/s Production efficiency for tinned wires at production speeds reduced by about 20%. |
8-wire drawing machine