Solar cell panel tester IEC60904-9 (A grade) Light nonuniformity, instabilityA grade Voc,Isc,Pmax,Vm,Im, FF,EFF,Temp,Rsh
Solar Cell Panel Tester Sorter
Products character •Adopts pulses Xeon-lamp as Simulation photosource, special material cavity reflection device realize high uniformity of the simulated sunlight, avoid the influence caused by temperature from steady-state sun simulator to the testing result•spectrum meet IEC60904-9 spectral irradiance distribution of requirements (AM1.5)•Software can display the I-V curve of the interface record of the current work and automatically preserved main test parameter of all module to the assigned folder. The specified file can be self-named, support data summary and print.•Test Parameter is including Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp,Rs, Rsh
Application• Used in the filtration of solar cell testing
Technical parameters
Model | KJG-S-3A | KJG-S-B |
Spectrum | Meet the IEC60904-9 requirement (A grade) | |
Single light width | 10ms | |
Light intensity | 100mW/cm2 (adjustment range: 20-120mW/cm2) | 100mW/cm2 (adjustment range: 70-120mW/cm2) |
Light nonuniformity | ≤±2%(A grade) | ≤±3% |
Light Instability | ≤±2%(A grade) | ≤±2% |
Consistency of test result | ≤±0.5% | ≤±1% |
Electricity properties testing error | ≤±1% | ≤±2% |
Test range | 0.1W-5W | |
Test area | 200mm*1100mm | |
Test current | 0A-20A (distinguishability 1mA) | |
Test Voltage | 0V-0.8V(distinguishability 1mV) | |
Test speed | 3 seconds/ sheet | |
Data acquisition quality | 5000 data point (I-V Curve) | |
Test parameter | Isc,Voc,Pmax,Vm,Im,Ir,FF,EFF,Temp,Rs, Rsh | |
Power source | 220V/50Hz/2kW | |
Machine installation
1. Test machine (include Electronic load detector): 1 set
Light source: 1 pieceSpecial software: 1 pieceStandard cell(use for adjust light intensity and uniformity): 1 setTest table: 1 pieceSynchronous high-speed A/D integrated circuit board: 1 pieceCustomer will prepare by themselves:
1. Computer: 1 Set
2. A4 printer: 1 Set
Solar Cell Penal Tester Sorter
