Solar cell panel tester, sorter Light instability nonuniformity (A grade) IEC60904-9 (A grade) Voc,Isc,Pm,Im,Vm,FF,EFF,Temp
Solar Cell Module Panel Tester
Products character• It adopts horizontal box and downwards light optics design, suitable for intermediate testing and solar module final testing.•Adopts large pulses Xeon-lamp as Simulation photosource, ceramic cavity reflection device realize high uniformity of the simulated sunlight, avoid the influence caused by temperature from steady-state sun simulator to the testing result•Simulator light spectrum meet IEC60904-9 spectral irradiance distribution of A-level requirements•Light intensity 120Mw/cm2 (adjustment range: 50-125Mw/cm2)•Advanced precision constant light control technology, radiation instability: :±3%(A grade)• Pulsed xenon lamp imported from Germany, with a special filter optical component, ensure test source spectrum correctly, long lifetime of use•Counting function of flashes(Zero reset when replacement)
•Auto or manual temperature compensate and light intensity compensate
Application and MarketSpecially used in testing mono-crystalline silicon, poly-crystalline silicon, amorphous-crystalline silicon solar cell module.
Technical parameters
Model | KJG-T-3A | KJG-T-B |
Spectrum | Meet the IEC60904-9 requirement (A grade) | |
Single light width | 10ms | |
Light intensity | 100mW/cm2 (adjustment range: 20-120mW/cm2) | 100mW/cm2 (adjustment range: 70-120mW/cm2) |
Light nonuniformity | ≤±2%(A grade) | ≤±3% |
Light Instability | ≤±2%(A grade) | ≤±2% |
Consistency of test result | ≤±0.5% | ≤±1% |
Electricity properties testing error | ≤±1% | ≤±2% |
Test range | 1600mm 5W-300w | |
Test area | 2000mm*1100mm | |
Test current | 0A-20A (distinguishability 1mA) | |
Test Voltage | 0V-100V(distinguishability 1mV) | |
Test speed | 5 seconds/ sheet | |
Data acquisition quality | 8000data point (I-V Curve) | |
Test parameter | Isc,Voc,Pmax,Vm,Im,Ir,FF,EFF,Temp,Rs, Rsh | |
Power source | 220V/50Hz/2kW | |
Solar Cell Penal Tester Sorter
Products character •Adopts pulses Xeon-lamp as Simulation photosource, special material cavity reflection device realize high uniformity of the simulated sunlight, avoid the influence caused by temperature from steady-state sun simulator to the testing result•spectrum meet IEC60904-9 spectral irradiance distribution of requirements (AM1.5)•Software can display the I-V curve of the interface record of the current work and automatically preserved main test parameter of all module to the assigned folder. The specified file can be self-named, support data summary and print.•Test Parameter is including Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp,Rs, Rsh
Application• Used in the filtration of solar cell testing
Technical parameters
Model | KJG-S-3A | KJG-S-B |
Spectrum | Meet the IEC60904-9 requirement (A grade) | |
Single light width | 10ms | |
Light intensity | 100mW/cm2 (adjustment range: 20-120mW/cm2) | 100mW/cm2 (adjustment range: 70-120mW/cm2) |
Light nonuniformity | ≤±2%(A grade) | ≤±3% |
Light Instability | ≤±2%(A grade) | ≤±2% |
Consistency of test result | ≤±0.5% | ≤±1% |
Electricity properties testing error | ≤±1% | ≤±2% |
Test range | 0.1W-5W | |
Test area | 200mm*1100mm | |
Test current | 0A-20A (distinguishability 1mA) | |
Test Voltage | 0V-0.8V(distinguishability 1mV) | |
Test speed | 3 seconds/ sheet | |
Data acquisition quality | 5000 data point (I-V Curve) | |
Test parameter | Isc,Voc,Pmax,Vm,Im,Ir,FF,EFF,Temp,Rs, Rsh | |
Power source | 220V/50Hz/2kW | |
Test Solar Cell Battery Machine
