The new generation of Infrared type combustible gas detector AEC2232dX/IR spectra characteristics through an infrared sensor detection hydrocarbons, ethanol, epoxy ethane, etc, and concentration of gas output 4-20mA output signal, also can standard three group relay contacts signal (fault signal, high/low limit alarm signal), direct access DCS/EDS/PLC/RTU etc data acquisition system or other instrument sound-light alarm output, and linkage to avoid malignant accidents.

       This series still has the following characteristics: to probe the highlighted LED display, Low/upper limit alarm concentration can be set, Using button, can according to demarcate calibration gases concentration, operation calibration value set more convenient.

       The probe using mature the dispersion of infrared sensor and digital processing chip technology technology, has built-in temperature compensation function. Sensors including optical components, electronic circuit and external structure hardware. Products with the detection sensitivity high and stable performance, long service life and low consumption, but in oxygen or anaerobic conditions and linear output, etc.

       This series of detectors are widely used in petroleum, chemical, pharmaceutical, steel and special industrial workshop, storage and transportation industries may have combustible gas and steam leakage flammable places.

·         The dispersion of mature technology import high sensitivity, infrared sensors, stable performance, long service life and low consumption.

·         But in oxygen or anaerobic conditions of linear output, gas concentration, high accuracy, without calibration.

·         Highlight LED scene shows, low/upper limit alarm concentration field setting.

·         Sensor excellent optical components, electronic circuit and external structure hardware, realizing the function of temperature compensation of detector.

·         4-20mA standard signal and three group relay contacts output can be fit for linkage of control system and the output control equipment.

·         Detect principle:

Infrared

·         Detected gas

polyurethanes, alkene and alcohol organic volatile flammable vapors, Carbon dioxide etc

·         Range

0-100%LEL, 0-5000ppm, 0-5%VOL, 0-100%VOL

·         Accuracy:

±5%F.S

·         Power supply:

DC24V±6V

·         Power consumption:

≤3W

·         Operating environment:

-40-+70; Relative Humidity≤93%incondensable

·         Output: 

4 -20mA standard signal and three group relay contacts output

·         Display:

LED

·         Installation:

Hanging, suck, holding tube

·         Explosion proof connection thread:

G3/4internal

·         Explosion-proof Class:

ExdCT6

·         Protection Class:

Up to IP66

·         Material:

Aluminum