Product Name: Phenolic Resin Water-based Mold Release AgentProduct Type: 7301/7300/7320Product Feature:1. Milk white or light yellow liquid, the proportion is 0.99 kg/liter, no flash point2. It’s non silicone water-based concentrated emulsion, with good high temperature stability and excellent lubrication and releasing performance.Scope of application:It’s applicable to a variety of hot mold pressed products, especially for resin grinding wheel and other phenolic resin products, and brake pad (band), clutch disc contains a lot of resin and rubber powder. Using method:1. Before the use, it’s diluted by deionized water with a 1:15 solution, the best ratio should be determined by the test, in order to avoid excessive use.2. Spraying method, the solution will be evenly sprayed in the hot mold cavity, then can start production.3. The solution should be just prepared when use it, and can’t be rewinded back again, should keep the container sealed, can’t be mixed with other release agent or acidic and alkaline substances. Packing, Storage and Transport:1. 25kg or 200kg per drum2. Transport as the non hazard goods, stored in the warehouse under 2-42℃, and prevent freezing.3. Properly use it can’t cause the damage, if need the full details, please ask us MSDS.Shelf Life:6 months
