Mold Release Agent for Carbon FiberSpecifications:carbon fiber release agent is suitable for various fiber composite winding rod products. Fiber releasing agent is a kind of carbon fiber composite material special release agent, compared with similar products with release force is small, the surface is exquisite, reliable quality etc.. Release agent (mould release) is suitable for various fiber composite winding rodproducts such as (carbon fiber badminton racket, golf, fishing rod, carbon fiber tube, carbon fiber bicycle frame, shaft rod, fishing, tennis racket) release.The release agent is a kind of functional material between the mold and products, is to prevent the rubber, plastics, elastomers or other materials, such as moldlaminate bonded to the mold or other layout, a kind of easy to separate from theeffects of processing aids.The rapid development of injection, extrusion, clendering, embossing, laminating and other process.Product characteristics:1.Good stability At the mold surface can be rapidly formed, the mold surface with Good adhesion, no accumulation in the mold and the product surface.2.Excellent lubrication Film uniformity,smooth filling the slurry into the cavity, while greatlyReducing friction between the mold product, making the product more Smoothly stripping and extend tool life.3.Very low odor performance Smell very gentle , non-irritating odor in operation, maintain good Environmental workshop.4.Good safety performanceDoes not contain any harmful ingredients, the human body without harm.5.Good cleaning performance Mold surface is almost no residue, cleaning and maintenance is simple, Does not affect the smooth surface coating products.6.Extension of timeFog peer products in 10 product molds do fog, our products can be doneAfter 18-24 start fogging product mold, reduce the number of cleaning Mold saving sealing dosage, increase productivity.Data sheet:AppearanceColorless or light yellow liquidViscosity100Cs-150CsStripping forceN100M3-<40Temperature℃70-250Usage:1.First with a suitable solvent or cleaning agent thoroughly cleaned moldRelease agent to remove the old residual or other dirt then wipe with aClean cloth or towel.2.Use air-assisted airless spray or spray equipment, brush availableBrushed or wiped with a cotton.3.After each release, and then coated on the entire mold release layer ofThe release agent evenly to ensure good releasing effect.
