pre-press 1.small volume,good appearance 2.wide application in wood-based pannel industry,specially for plywood manufacture.
1. The machine is used for Pre-pressing process of making plywood, blockboard and decorative board, small volume,handling,conveninet asemmbly.
2.In and out of gas hose adopts heat-resisting corrugated pipe,steel wire enhance hose ,use a long life cycle,is not easy to damage.
3.Hydraulic device main components are installed in compressor top,cover a small area pipelines road aleady matched good before delivery ,dispense with spot configuration .
4. Install basic shallow,deepest is not higher than 0.7MM.Bring convenience for cleaning,maintenance,and good safety .
5.Small work power ,fast closing speed,simple structure,low cost.
6.Good synchronicity,lift smoothlyand low failure rate,easy maintenance.
MAJOR TECHNICAL PARAMETERS
| ITEM NO | DESCRIPTION | UNIT | SPECIFICATION |
| 1 | MAIN CYLINDER TOTAL PRESSURE | KN | 5000 |
| 2 | SIDE CYLINDER TOTAL PRESSURE | KN | 140 |
| 3 | MAIN CYLINDER RATED PRESSURE | MPa | 21 |
| 4 | LIFT CYLINDERRATED PRESSURE | MPa | 14 |
| 5 | CLOSING TIME | S | NO MORE THAN 25 |
| 6 | FALLING TIME | S | NO MORE THAN 20 |
500T 4*8feet wood panel cold press with chain
