Four side moulder
Detailed Product Description
STANDARD CONFIGURATION:1. This adopts step-less material feeding, material feeding speed ranges from 7m/min to 28m/min.
2. Each principal axis adopts independent drive to electric motor, features stronger cutoff force.
3. Adjusts for principal axis integrates at central or frontal side, features easy operation.
4. Galvanized workstation features superior abrasion resistance.
5. Equips with auxiliary unit alarming lack of material, it effectively improves smooth feed-in while lack of material.
6. Active roller below improves feeding efficiency.
7. Pneumatic pressing feeding roller section by section adjusts for pressing force, it favors for smooth feed-in of different thicknesses of timber.
8. Adopts central charging system, features convenience and promptness.
9. Equips with world-class electric element, features superior stability.
10. With fully sealed safety protective cover, this effectively avoids flying logging debris and noise blocked, and even acts as safety protection.
| Machine Parameter | Horizontal Lifting | 0.75KW/1HP | |
| Working Width | 25-230 mm | Feeding Motor | 5.5KW/7.5HP |
| Working Thickness | 8-150 mm | General Power | 54.75KW/73HP |
| Working Table Length | 1950 mm | Cutter Diameter /mm | |
| Feeding Speed | 7-28 m/min | 1st Lower Shaft | φ125 mm |
| Main Shaft Diameter | φ40 mm | Right Vertical Shaft | φ125~φ180 mm |
| Main Shaft Revolution | 6000 r/min | Left Vertical Shaft | φ125~φ180 mm |
| Pneumatic Source Pressure | 0.6 MPa | 1st Upper Shaft | φ125-φ180 mm |
| Motor Power | 2nd Upper Shaft | φ125-φ180 mm | |
| 1st Lower Shaft | 7.5KW/10HP | 2nd Lower Shaft | φ125-φ180 mm |
| Right Vertical Shaft | 7.5KW/10HP | Remarks/mm | |
| Left Vertical Shaft | 7.5KW/10HP | Feeding Wheel Diameter | φ140 mm |
| 1st Upper Shaft | 11KW/15HP | Dust outlet Diameter | φ140 mm |
| 2nd Upper Shaft | 7.5KW/10HP | Physical Dimension | 4168×1635×1735 mm |
| 2nd Lower Shaft | 7.5KW/10HP | ||
