Welcome to ECBAY
(Manufactory) 3G Wlan/Wireless Rubber Antenna
(Manufactory) 3G Wlan/Wireless Rubber Antenna

1.Impendence:50 ohm 2.Certification:ROSH, CE, ISO9001:2000

3. Electrical Characteristics

3.1 WiFi Antenna

Form 1

No.

Item

Specifications

1

Frequency(MHz)

2400~2500 MHz

2

V.S.W.R(in BW)

≤2.0:1

3

Gain(Zenith)

2 dBi

4

Polarization

Vertical

5

Impedance

50 Ω

3.2     Mechanical

Form 2

No.

Item

Specification

1

Cable

RF1.13 or others

2

Connector

IPEX or others

3

Plastic Housing

Black

5.Environmental Specifications

Post Environmental Tolerance (Refer to the form 1~2 )

Condition:Temperature range 25±3°C

Relative Humidity range 55~75%RH

Operating Temperature range -40°C~+85°C

Storage Temperature range -40°C~+100°C

5.1 Moisture Proof

The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.

5.2 Vibration Resist

The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.

5.3 Drop Shock

The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.

5.4 High Temperature Endurance

The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5°Cfor 24±2 hours and 1~2 hours recovery time under normal temperature.

5.5 Low Temperature Endurance

The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature.

5.6 Temperature Cycle Test

The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25°C and high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.

6.Weatherproof

Put the antennas in 1m deep water for 12h, and find 100% waterproof.

...

(Manufactory) 3G Wlan/Wireless Rubber Antenna

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.