USB Powered; Plug and play; All operating system supported; 1. Overview
The ZigBee wireless USB Stick (RD1100) is effectively an RS232 to USB bridge connected to a REX3SP ZigBee module. This allows connectivity to a computer’s USB port.
The supplied drivers create a virtual COM Port, so that the command line of the REX3SP can be accessed via any terminal software application.
1.1. Operating Systems Supported• Windows 98SE
• Windows XP
• Windows 2000
• MAC OS-9
• MAC OS-X
• Linux
2. Absolute Maximum Ratings
Parameter | Min | Max | Unit | Testing condition |
Supply Voltage Vdd | 4.0 | 5.25 | V | |
Voltage on any pin | -0.3 | 3.6 | V | |
Storage Temperature | -55 | 125 | °C |
Table 1: Absolute maximum ratings
The absolute maximum ratings given above should under no circumstances be violated. Exceeding one or more of the limiting values may cause permanent damage to the device.
3.Operating Conditions
Typical values at 5V 25°C.
Parameter | Min. | Typ. | Max. | Units | Condition |
Current (TX) | 160 | 165 | 170 | mA | TX P=20dBm |
Current (RX) | 34.8 | 36.0 | 37.4 | mA | RX PA LNA Open |
Standby Current | 29.8 | 31 | 32.5 | mA | IDLE PA LNA Closed |
Sleeping Current |
| 105 |
| uA | SPLEEP |
Operating Temperature | -40 | 25 | 85 | °C |
|
Table 2: Operating Condition
4. Other data
For further technical information, including radio certification, please see the REX3SP Module Product Manual at www.rexense.com.
For more information on ZigBee® compliance and the AT command interface firmware please refer to the latest AT command dictionary and the REX3SP user guide at www.rexense.com.
5. Firmware Upgrades
The drivers provided will generate a virtual COM port allowing easy access to the serial port of the embedded REX3SP.
To read more about the REX3SP wireless mesh networking module and its command line interface please read the corresponding documentation which can be found at www.rexense.com.
ZigBee Wireless USB Dongle/Stick for smart home automation
