1) Welding Electrode AWS E6020 2) ISO9001,CE,TUV,DB,CE 3) Dia: 2.0mm,2.5mm,3.2mm;4.0mm;5.0mm;
AWS E6020 Welding Rod / Welding Electrode
Standard:
GB E4320
AWS E6020
JIS D4320
DIN E4354AR11160
Description:
AWS E6020 has a heavy mineral type of coating and is outstanding for high speed and quality downhand welds. The heavy coating permits the use of high welding currents without undue spatter and provides very rapid deposition and burn off rates. Arc action is forceful and provudes deep penetration especially at high currents. bead contour in deep grooves is concave, and flat in horizontal fillets; the thick slah covering is porous, brittle and very easy to remove. The deposited metal has outstanding mechanical properties including good tensile strength and impact qualities, high ductility and no porosity.
Application:
AWS E6020 is designed for making deep groove welds in the downhand position as well as fillet welds in the horizontal and flat positions. The usual applications include pressure vessels and their connections, heavy machine weldments, structural assemblies and practically all heavy steel aseemblies where high weld quality is important.
Procedure:
AWS E6020 may be used with either AC or DC (straight or reverse polarity). When DC is used, reverse polarity is recommended for groove welding; straight polarity for horizontal fillet welding. In single pass fillet welding weaving is usually dispensed with. In flat butt welding, weaving is needed to assure wash-up on the side wall of the joint, but the arc is never played up the side wall.
Mild Steel Electrode AWS E6020 GB E4320 | ||||||||||||||||
Introduction: E6020 is a kind of carbon steel electrode with ferric oxide type coating. AC/DC. Used for downhand welding and flat fillet welding. The characteristics of this kind of electrode are its deep penetration, high melting rate and better hot cracking resistance due to its higher manganese content. | ||||||||||||||||
Uses: Able to weld key low-carbon structures, such as heavy machinery, construction machinery, etc. | ||||||||||||||||
Chemical Composition of Deposited Metal (%)
| ||||||||||||||||
Mechanical Properties of Deposited Metal
| ||||||||||||||||
X-ray Radiographic Inspection: Degree 2 | ||||||||||||||||
Reference Current (AC, DC-)
| ||||||||||||||||
Instructions: When using direct current, the electrode should be connected to the negative terminal (DCSP). | Welding Positions: HF,F
| |||||||||||||||
Typical all weld mechanical properties
Tensile Strength: 72,000 psi
Yield Point: 62,000 psi
Elongation: 28%
Charpy V notch: Not Required
Low Carbon Steel Welding Rod / Welding Electrode AWS E6020
