Welcome to ECBAY
two component flexible waterproof coating
two component flexible waterproof coating

two component flexible waterproof coating 1,high bond performance 2,good water resistance 3,good alkali resistance two component flexible waterproof coatingProduct short introduction:The product is a modified polymer cement-based waterproof membrane.The product have the following characteristics:1,high elastic,waterproofing ,environmental2,good flexibility and durability ater filem formation,can prevent micro cracks caused by shocking,expansion or shrinkage3,high water resistance, good  permeability, can avoid wall from moisture condensation4,strong bonding strength, convenient construction, no crackingApplication rangeIt can widely used in roof ,balcony,bathroom,kitchen,baseroom, swimming pool. sewage disposal  Reservoir and so on., especially for the place where need to bend tiles ,trowel paste after waterproof membrane constructionBasic performance:

project

 Performance index

tensile strength

≥1.2

Tensionset

≥200

Low temperature, best diameter 10mm

-10°C no cracking

Waterproofness(o.3MPa,30minutes)

Water-resistant

Notes:1,Do not do the construction under 5°C,the time of film formation will be longer in stuffy or high humidity weather2, Prevent it from rain,heat,sunlight and frost in 24 hours after brushing waterproof mortar 3,corner need not to be strengthen with non-woven fabricConstruction points:1,the surface must be dense.dry.clean.no oil, dust and other dirties.2,brush M08 waterproof paint, let it dry3,powder:liquid=1.25:1,mix the product to even paste and can be used. The mixed product should be used up within 2 hours.4,use roller to paint the mixed past on base material,thickness is about 1mm.5,after the first waterproof membrane all dry, smear from the different direction with the same method second time, the thickness should be 0.5mm~0.9mm..The thickness of dry film should be kept from 1.2mm~1.5mm5,after 24 hours maintenance, can do other construction, such as : bond tiles, brush paste and so on.Dosage reference:If dry film thickness is 1.2mm,each group can use 20~25m2: If the thickness is 1.5mm,each group can use 16~20mPackage and storage:Powder:25kg/bag: Liquid:20kg/barrel.Keep it in cool and dry place, unopened product can be stored for 6 months.

two component flexible waterproof coating

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.