Waterproofing Membrane 1.1x10m/roll;1x20m/roll 2.1.2/1.5mm available 3.Ageing resistance, long service life
Black EPDM Rubber Waterproofing Membrane
Features
Good ability of anti-aging, resistant to high and low temperature. High tensile strength and enlongation, which adapts to the contraction or crack of the base.
Technical Index(Executive standard: GB18173.1-2006)
| No. | Item | Technical index | ||
| JL1 | JF1 | |||
| 1 | Tensile strength at break Mpa | Normal temperature≥ | 7.5 | 4.0 |
| 60°C≥ | 2.3 | 0.8 | ||
| 2 | Elogation at break | Normal temperature≥ | 450 | 400 |
| -20°C≥ | 200 | 200 | ||
| 3 | Tearing strength KN/m≥ | 25 | 18 | |
| 4 | Impermeability 30minutes No leak | 0.3Mpa | 0.3Mpa | |
| 5 | Low temperature flexibility °C≤ | -40 | -30 | |
| 6 | Heat air ageing 80°C x 168h | Tensile strength retention rate % ≥ | 80 | 90 |
| Elogation retention rate % ≥ | 70 | 70 | ||
| Apperance of 100% elogation | no crack | no crack | ||
Where to use
1.Basement, lavatory and roofing of key waterproof engineering, general and civil engineering.
2.Bridge, road, granary, tunnel, park, pool and others.
Application:
1. Make sure the base surface smooth, clean and dry(Moisture<9%), then paint the delicated agent on the base surface. Start application till it is dry.
2. Reinforce the parts which are easy to leak, such as seam, hole, channel, wall, pipe and corner.3. Application Method:
Lay the membrane directly. Be careful to control the overlaps of the long side and short side.
4. After application, a careful inspection is required. Make sure there is no air bubble, no fold, no falling away etc to guarantee the waterproof life.
Product Pictures
Black EPDM Rubber Waterproofing Membrane
