Welcome to ECBAY
MIROS Drinking Water Treatment RO System
MIROS Drinking Water Treatment RO System

Automatic RO system Stainless Pumps, Pre/Post-filter Used for Commercial Preparation of DI Water 3styles: ECN, STD, ADV ODM

ODM-----

We prefessionally design and build tailor-made RO (Reserve Osmosis) system to meet your urgent and unique demand.

The RO system equipment has 3 styles as bellow: 

Model No.NameDescriptionStyle of ControlController
ECNEconomicalMain UnitMCUARCHIMEDES AS25RO
STDStandardECN MCUARCHIMEDES AS25RO
& Chemical CIP system
ADVAdvanced TypeSTD PLCSIEMENS/
& Dosing ControlTouch PanelMITSUBISHI

  

Standard 

Chinese National Standard GB/T19249-2003

  

FEATURES AND SPECIFICATIONS (Single Stage RO System)

 

No.FeaturesECNSTDADV
1Stainless Feed PumpVVV
2Pre-filterVVV
3Post-filterVVV
4Stainless Booster PumpVVV
5Stainless Membrane HousingVVV
6RO MembraneVVV
7Product / Permeate FlowmeterVVV
8Waste / Concentrate FlowmeterVVV
9Feed Conductivity MeterVVV
10Product Conductivity MeterVVV
11Feed Pressure GaugeVVV
12Pretreatment Pressue GaugeVVV
13Operating Pressure GaugeVVV
14Final Pressure GaugeVVV
15Feed Water Tank Level GaugeVVV
16Product Water Tank Level GaugeVVV
17Low Pressure ProtectionVVV
18High Pressure ProtectionVVV
19Autoflush SystemVVV
20Environmental Powder Coated frameVVV
21Color Plexiglass Grahpic PanelVVV
22Powder Coated Electrical CabinetVVV
23*Chemical Clean-In-Place Tank VV
24*Stainless Chemical Clean-In-Place Pump VV
25**ARCHIMEDES Controller  V
26**MITSUBISHI PLC Control  V
27**PROFACE Touch Screen  V
28**Chemical Feeders  V

 

The pipes used in the Reverse Osmosis system are especially for the chemical industry. This kind of RO system is designed for automatical operation. But the automatic pre-treatment unit is optional (it’s not included).

Performance Data

 ItemDescription
1Maximum Amount of Aater Supply1.6 times as product flow at 25oC or 77oF
2Maximum Operating Pressure1.5Mpa
3Minimum Operating Temperature5oC or 41oF
(Freezing can cause equipment damage.)
4Maximum Operating Temperature35 oC or 95oF
5Design Temperature25oC or 77oF
6Design Product FlowProduct Flow  at 25oC or 77oF
7Highest Operating Altitude1500m 
(It’s necessary to point out the higher altitude more than 1500m when place an order.)
8Electrical Requirement380V 50Hz 3-phase 5-wire
(It’s necessary to point out the other electrical requirement when place an order.)
9Post-filter(bag)5um membrane, corrosion-resistant
10Sterilization EquipmentOptional (it’s not included)
11Effective Volume ofFeed Water TankAt least the total amount volume of product watre per hour
12Effective Volume of Product Water TankAt least the total amount volume of product watre per hour
13All the design and nominal data is base on 25oC or 77oF
14Calculate according to the temperature correction curve when the working  temperature is not 25 oC or 77oF.
15The RO system is equiped with pre-filter for pretreatment only when product water flow is less than 2T/H.
16The individule pretreatment units shoud be added to the RO system when product water flow is over 2T/H.

MIROS Drinking Water Treatment RO System

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.