1.Stronger decolorization(>95%) and removal of COD,BOD(40-70). 2.Faster sedimentation, better flocculation.
efficient Decoloring Agent for textile and dyeing industry
This product is a quaternary ammonium cationic polymer. It has excellent efficiency in decoloring, flocculating and COD removal.
1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing & dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40~70%.
1. It is mainly used for waste water treatment for printing, dyeing, textile, mining, ink, paper and so on.
2. It can be mainly used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
3. It also can be used in the production process of paper & pulp as retention agent.
Dose TS/ED-E → Dose PAC → Dose PAM → treated water
colorless or light-color sticky liquid
Solid content /% ≥
Dynamic viscostity /mpa·s(20°C)
PH (30% water solution)
The product can be made upon customers’ special request.
In the practice application, apply with PAC and PAM together, it can get better result and it is more economic.
NotesThe product shall be diluted with 10-40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.The optimized PH of the wastewater accepted is 6-10.It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of dosage depend on the flocculation test and the effluent treatment process.The product is nonflammable and unexplosive. The suitable storage temperature is 5-30 °C.The product is packed in plastic drums according to the requirements of clients.The product would show layer separation and become white at low temperature. There is no negative impact on the usage after mixing up.The shelf life is 12 months.The product has some corrosivity. It needs lot of water to wash if the product splashes into eyes.
Decolorant for textile and dyeing printing industry waste water treatment