1) Small-sized design 2) Low power consumption 3) Fully-automatic 4) Self-cleaning 5) Little noise& vibration
Screw press sludge dewatering machine
The screw type sludge dewatering machine consists of fixed ring and moving ring and screw
shaft is throughout in it as the filter unit.
The sludge is conveyed to the dewatering zone after the gravity thickening,during the
process of advancing,screw pitch of screw shaft becomes narrower and narrower and
under the stop function of back pressing board,the very large internal pressure is
generated and the volume shrinks continually,so dehydration purpose is attained eventually.
|Model||DS Standard handling capacity||Sludge handling capacity|
|low concentration =»high concentration||2000mg/L||5000mg/L||10000mg/L||20000mg/L||25000mg/L||50000mg/L|
|EX131||˜6kg/h||˜10kg/h||˜ 3m³/h||˜ 1.2m³/h||˜ 1m³/h||˜ 0.5m³/h||˜ 0.4m³/h||˜ 0.2m³/h|
|Model||Screw shaft specification||The mud cake discharge outlet (The distance from the ground)(mm)||Machine size (mm)||Net weight||Operating weight|
|Model||Motor Power(KW)||Water pressure for the cleaning||Water consumption for the cleaning (L/h)||Maintenance frequency||Consumable parts replacement cycle (Year)|
|Screw shaft||Mixer||Total||Screw shaft|
(No need for high pressure washing device)
screw press sludge treatment machine