Automatic industrial water filter 1.high-efficiency 2.Capacity: 10~200T/h 3.Turbidity water: max 3000mg/L 4.Unattended opera
I. Overview Traditional turbidity, purple-red, organic matter removal is coagulation, sedimentation, filtration, disinfection, but several units are separate areas for large manufacturers and centralized water supply area is the adaptation of life, but the small manufacturer or it is very remote mountain economy. A few years ago, the domestic development of the kg-l water purifier has a set of coagulation, sedimentation, filtration in one, but the need to manually backwash backwash, and the need to provide power, the cycle is difficult to grasp, so of water quality, to the manufacturers with to economic losses. zg Development of automatic water purifier, water absorption of the advanced technology combined with our years of practical experience, with practical, efficient, stable, operating costs and other characteristics province, is a worthy new product.Second, characteristics 1. In addition to a pump dosing system of management, the water purification device itself from the reaction, poly condensation, precipitation, set mud, water harvesting, water distribution, filtration, recoil, sewage and a series of running the program, reaching the requirements to run automatically, on duty for as long as regular monitoring of water quality, the need for water purification unit operation and management. 2. High concentration of polymer coagulation zone: A flap flocculation reaction, impurities in raw water to make the particles more fully in a collision during the adsorption probability, the reaction flocs in 3mm or more, because of water quality, water quantity change for strong, and the short residence time, and the corresponding amount of savings flocculant. 3. Quick reduce sludge mud room and can be automated debugging system to ensure that the excess sludge and remove impurities, thus ensuring the stability of particle removal of impurities. 4. Efficient flocculation sedimentation effect machine, so that precipitation water quality has been good water quality. 5. New original catchment water harvesting systems and minimum head, so that more uniform and effective watershed not only improve the volume utilization factor, and its catchment head low, the accumulation of considerable power saving. 6. Water Purification Systems, both to ensure efficient water filtration system (in the raw water turbidity ≤ 3000mg / 1 hour, filtered water turbidity can be maintained at 3mg / 1 or less) and can automatically kick, without another backwash pump or air compressor and other electrical equipment, can save a lot of infrastructure investment and daily operating costs. 7. Since the water is low, less than 5%, and save the limited water resources from the guarantee. 8. Area is small, compared with the normal water structure, about 50% area savings of about 4.20 or so in height, both indoor and outdoor installation. 9, different to the flow by conduction inclined tube filler sedimentation. Improve the surface loading, sedimentation effects, shorten the settling time.Third, the process The device set mixing, flocculation, sedimentation, filtration in one of the automatic water purifier, the working process is as follows: Run: Mixed → → → sedimentation flocculation water filter → Backwash Start: Anti-siphon system washing tank → → filter layer Backwash End: Siphon Siphon System Controller →
Automatic industrial water filter
