1.Material:Stainless steel304, 2.Filter precision: 50~100mu 3.Color:blue,golden,customization 4.Size:186*107mm 5.Weigh:500g
products' specifications:
1.Model:SZ-Q018
2.Material of main assemblies: stainless steel 304, voyage food grade material
3.Filter precision: 50~100mu
4.Suited water gage: 0.1~0.4Mpa
5.Water quality requirement: municipal administration tap water
6.Washing method of filter element: Paramagnetic flushing
7.Size:186(length)x107(width)mm
8.Weight:500g
9.Color:blue,golden yellow, or customer request
Kindly reminder: pls pay attention to your drinking water!
Main features:
1. High quality stainless steel wire
2. Hyaline filterable tank, easily and every time to see filter results.
3. Manual wash, wash conveniently.
4. Large flux design, meet the central water purification of customers’ request
5. Environmental protection design, concise and easy
Products’features:
1.Pre-filter can prevent the dust, suspended matter, rust and sandy soil etc. from entering into family from the source, to clean away the impurity in water.
2.Protect the safety of pipeline. Stable the water route pressure efficiently. Protect water purifier, water-softeners, washing machine, dish-washing machine and water heater, etc. Remove the water hammer trouble. Save water resource.
3.The main body of the filter is made out of aviation plastic, chemical property is very stable, the strainer screen is made out of stainless steel 304, the filter bowl cover is made out of food grade plastic.
4.When the filter is cleaning itself, it will still flow out water normally.
5.The water inlet, outlet and flow out can be connected with the four points screwed conduit or braidd tube.
6.As per the different quality of water, the pre-filter should be opened the draw off valve to start cleaning process at least 1 to 2 months.
Main components:
upper cover, filter element seal ring, seal ring, screen box, hyaline tank, stainless steel cloth, special spanner, buckle, self-tapping screw
Method of application
1.This pre-filter is usually be installed behind the family flooding water head valve or behind the water meter. As per the customers’condition: the input, output and drain outlet can be connected with the pipe network directly, or braidd tubes. The drain outlet should be connected with the tap switch, so that can periodic blow down.
2.After finishing the installment, customer open the input valve, the pre-filter will start working normally. Please pay attention to the connection of each component to check whether there is the leak or water seepage, if so, please check that joint carefully to see whether they are tightened up.( it is better to check for at least 5 minutes.)
3.Customers can see clearly the impurity filtered from the filter screen through the hyaline tank, so if the impurity influence the water yield or the water pressure, customer can use the matched spanner (for free, and send together with the pre-filter) to strike the hyaline tank to wash the filter screen.
Application
High quality raw material, longer life time
Hyaline shell, as plain as daylight
Classic design, concise and easy
Cross-flow flushing, simply maintenance
Stainless steel wire, higher precision
home appliance scale-borer water pre-filter
