Manual Batch Control Water flow Meter Application: Measuring the volume of the cold portable water passing through
Manual Batch Control Water flow Meter
Application:
Measuring the volume of the cold portable water passing through the pipeline.
Working conditions Water temperature:≤90°C Water preesure: ≤1.6Mpa
Features
Wide choice of dials.Offer a low cost solution for accurately controlling batched quantities of water with a choice of dial readings from 100litres to 5000 litres.
With single pointer. DN25~DN40:brass body DN50: Cast iron
A plastic lid to protect the register from knocks.
An adjustable maker indicates the desired quantity.
Reset the big pointer to zero by hand.
Low preesure loss.
Specifically for simple filling operations and mobile concrete-mixers.
Use
1 Adjust the adjustable marker to reqired batch size
2.Open flow control valve until the revolving pointer coincides with the adjustable maker position
3.Reset revolving pointer to zero with zero setting lever.
Note:Please slowly close the flow control valve not abruptly,so as to avoid preesure surges.
Installtion Requirements
The meter should be installed in horizontal position with the regiter face upwards.
Pipeline must be flushed before installation.The meter should be constantly full of water during operation.
Manual Batch Control Water flow Meter
