Waste tyre&plastic recycling plant 1.Professional manufacture 2.ISO14001:2004 ,ISO9001:2008 and CE 3.Strict quality control
Our advantages:1. Environmental protection2. Safety3. Various handling capacity4.With ISO14001CE
5.Long using life
6.Satisfying after-sale service and 1- year quality guaratee
7.Direct manufacture
8.Strict quality control by professional inspectors
Raw materials can be used:
1. Waste/Used rubber tire
2. Waste industrial mixed plastics, and allow multi-kind flotsams exist at the same time, but PET is an exception.
3. Waste oil: For instance : waste diesel oil, engine oil, and other residue oil.
4. Waste cable skin (first dechlorination treatment will be suggested)
5. Waste crude oil and so on.
6. Regeneration of waste PMMA (polymethyl methacrylate)
Working process
First, the raw materials are put into the furnace, then seal the feed inlet then the bottom of the reactor will slowly heat the wastes by coal or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 300-400°C; oil steam will flow through light and heavy components separating device; light component will enter the condenser and meanwhile the residues will be discharged automatically in succession. But the liquefied part will be condensed to rubber oil, and the part that cannot be liquefied will be input into heating supply system for burning by way of combustion gas purification system.
We will be in charge of arranging our technician to go to your place to guide the installation and train your workers how to operate the pyrolysis plant.
Treatment of the residues
There are normally 3 kind of residues-exhausted gas, water liquid, waste solid,
1. Exhaust gas - By the means of full combustion in water seal and gas burner, the pollution of exhaust gas shall be eliminated and a large amount of fuel shall be saved. Also dust collector will be used to discharge the smoke and dust, and the discharge of the smoke and dust meets the related standards in 2001.
2. Waste liquid - Faintly acid waste water will be produced in the process of treatment of oil products, after neutralization by adding faintly alkaline liquor, the neutral waste water shall be harmless to three- grade filtration and can be discharged into special evaporation processor to vapor.
3. Waste solid - the solid left is carbon black, no solid waste left.
waste rubber pyrolysis equipment
