soft seat DIN gate valve: 1. size: 1-1/2"~24"; 2. non-rising stem design; 3. soft seated;
soft seat DIN gate valve :
1. size: 1-1/2"~24";2. non-rising stem design;3. soft seated ;4. Temp range: 80~120 degree;
5. available pressure: 150lb;
6. feature:
♦ Special protective surface finished by shot-blasting and internal and external
electro-statically applied epoxy resin. Full bore, without cavity, without sediment impurity.
♦ Resilient seat enables positive tight shut-off with no trapped debris, minimum head-loss, long lasting seal and accurate wedge guiding.
♦ Ductile iron core fully vulcanized with EPDM or NBR rubber with integral stem nut of dezincification resistant brass. Bonnet gasket is in groove between body and bonnet.
♦ Valve body cast precisely and its accurate geometric dimensions makes sure of its seal without any precise processing .
♦ Cast ductile body increases impact resistance and improve pressure performance. All external bolts are stainless steel for antirust.
7. certificate:
soft seat DIN gate valve
