The assembly line for GTX steel wire is an equipment to quench and temper steel wire by utilizing the induction heating method.
The assembly line for GTX steel wire is an equipment to quench and temper steel wire by utilizing the induction heating method. During the operation of the assembly line, workers need to feed and remove and connect the steel wire. Workers also need to modify the speed of material plate. The rest of the assembly line can operate automatically. The assembly line can be divided into two parts: the heating process by electricity and mechanical operation. This introduction only gives information about the mechanical operation of the assembly line.
Specification, function and use
1The maximum diameter of the steel wire: Φ5--Φ17mm2The speed of the steel wire on the assembly line: 5m/min30m/min3The steel wire is Φ900Φ1500 in circled bundles before being processed.4The steel wire is Φ1500Φ2500 in circled bundles after being processed.5The processed steel wire is coiled, cut and bound by workers.6The height of the steel wire on the assembly line is 1170mm.7The steel wire will go about 60m on the assembly line.8Power capacity and energy consumption:Water: tap water 0.3Mpa 90T/hElectricity: alternating current 380V 45KwAir: condensed air 0.8Mpa 6m³/h9Gross weight(only the assembly line): about 12.5 tons10Controlling mode: Adjustment can be made to certain unit while the whole assembly line is under central control. The assembly is also equipped with signals and devices that enable synchronized adjustment and safety protection.11Use: The assembly line can be used to quench and temper the steel wire. The steel wire with the range of Φ10Φ17 can be used in pressure roller and core-exchanging. The assembly line can be used to process different materials of different specification. It can also be used to quench, temper and anneal the steel wire.
pipe wire induction heating system
