48V UPS back up Li-ion battery (4KWH)2000cycletimes,5-7years cyclelife steady performance CE,UL,SGS/RoHS approved
UPS user’s manual
48V UPS back up Li-ion battery (4KWH)
(Please read the manual carefully before using)
Qinhuangdao Xinchi Photoelectricity Technology Co., Ltd
Operation Panel
Uninterruptible Power Supply
Model:XC-BD-UPS0001
Input: AC100V-50Hz/60Hz-1.5Kw
Output: AC100V-50Hz-3Kw
Battery Nominal Voltage:51.8V
Battery Capacity: 4KWh
Protection Grade: IP32
Working state
When open the invert switch,the equipment outputs 100V,the socket and terminals N L back of the equipment could output 100V. The display screen of inverter will show two voltage values. The first one is battery voltage, the second one is output voltage(100V normally) Battery capacity indicator
Battery capacity indicator will light. Please charge in time when the last one indicator light. It completely is not necessary that do the charge until the batteries discharge to zero. Charging state
Make the 100V alternating current access the connection ports AC IN back of battery, then open the charge switch. At this time, the charge display screen will display. And the switch near screen will change over the current display and the voltage display. The current is 0A, voltage is 58~58.8V, which means that the charging has reach full(at this time all the indicators will light, in the situation of invert open)Based on characters of this battery, the charging at any time will not injure battery. So, please do charge in time if you can.
It will take 5 hours from full discharging to full charging.
The time of charging is depends on the using of the home equipment.. 2kwh equipment as Example,it can supply 2hours.
Using Guide
u Environment condition
² Charge temperature 0~45°C
² Discharge temperature -20~55°C
² Storage temperature -20~35°C
² Altitude no more than 2000m
² Average relative humidity no more than 65%(25°C)
² Away from application in seriously tremble
² No corrosive gas in the surrounding medium
Transportation and storage
u Transportation
In transportation, the battery should be gently moved in the delivery period, throw, roll and pressure are forbidden to the battery.
u Storage
In the process of storage, the loaded retention should be less than 50% and have a charge every six months. Optimum storage temperature is 5~30°C in dry, clean and ventilation room.
Storage battery should avoid direct sunshine and placed more than 2m away from heat source.
Battery shouldn’t be inversed, and avoid mechanical impact or stress.
Attention items
u Far away from heat, water and fire.
u Don’t disassemble, reassemble, dissection battery or battery group.
u No disassemble and refit of the charger.
u Don’t reverse the battery positive electrode and negative electrode.
u Don’t short circuit the battery positive electrode and negative electrode.
u Don’t put the charger and battery in water or wet place.
u Don’t cast charger and battery randomly.
u Don’t puncture, scar the battery.
u Don’t use the battery in other fields.
u Using special charger to charge.
u Carefully read the specification before using the battery.
u Every three months the battery should be charged two hours.
NO WARRANTY IF USED FOR UTMOST TESTING
48V UPS back up Li-ion battery (4KWH)
