Detailed Product Description
uninterrupted power supply-- 12Vdc/1A, 13.8Vdc to battery
l COST EFFECTIVENESS
l LOW RIPPLE NOISE
l OVERVOLTAGE(V1), OVERLOAD PROTECTION
l SHORT CIRCUIT PROTECTION WITH AUTO-RECOVERY
l 100% FULL LOAD BURN IN TEST
l HIGH EFFICIENCY LOW WORKING TEMPERATURE
l BUILD-IN UPS WITH AUTOMATIC SWITCHING
l APPLICATION:SECURITY SYSTEMS
SPECIFICATION ALL specifiacation are typical at normal input,full load at 25 unless otherwise stated
INPUT | INPUT VOLTAGE | AC170V~264V |
FREQUENCY | 50--60Hz | |
INRUSH CURRENT | 30A/230V,Cold Start | |
LEAKAGE CURRENT | <0.5mA/230VAC | |
OUTPUT | LINE REGULATION | ±5% max |
RIPPLE&NOISE<mVP-P>1 | <1% of output voltage | |
Temperature coefficient | ±0.02%/ | |
Output voltage | ±10% | |
START-UP TIME | ≤1S(ACIN230V,Io=100%) | |
HOLD-UP TIME | ≥20mS(ACIN230V,Io=100%) | |
PROTECTION FUNCTION | OVER LOAD PROTECTION | 105%--150% of Rating,automatic recovery |
OVER VOLTAGE PROTECTION | 115%--135% of Rating(V1) | |
ISOLATION | INPUT--OUTPUT | AC1500V,1minute |
INPUT--FG | AC1500V,1minute | |
OUTPUT--FG | AC500V,1minute | |
ISOLATION RESISTANCE | INPUT--OUTPUT | ≥50MΩ,500VDC |
INPUT--FG | ≥50MΩ,500VDC | |
OUTPUT--FG | ≥50MΩ,500VDC | |
ENVIRONMENT | OPERATION TEMPERATURE | 0--45,20%--90%RH(Non Condensing) |
STORAGE TEMPERATURE | -20--85,10%--95%RH(Non Condensing) | |
ALTITUDE | <2000m | |
STRUCTURE | COOLING | Natural convection cooling |
DIMENSIONS | 145×80×40mm |
1 Figure is peak-to-peak .Output ripple is measured by using 20M oscilloscope
OUTPUT FEATURE
OUTPUT VOLTAGE | OUTPUT CURRENT | OUTPUT WATTAGE | EFFICIENCY | TOTAL REGULATION | MODEL NUMBER | ||
MIN | MAX | ||||||
+12V | A | 1A | 30 | 80% | ±5% | SW30-2TAC | |
