Taizhou Meitian Heat Transfer Printing Factory [China]

1.dark garment heat transfer 2.for inkjet printer 3.photo-like effect. 4.fashionable and stylish

dark garment heat transfer

Operating steps

1) Printing

- Printer setup. In print setup, recommend to select “text and images” and "plain paper" mode for satisfactory printing results.- Print the wishful pattern first onto transfer paper and leave it to dry for about 10 minutes before transferring.- Cut out the image, leaving a narrow margin of 5 mm around the pattern edges.

 2) Transferring- Preheat the heat press machine and set the recommended transfer temperature to 182-200°C.- Peel the base paper from the printed coating, and the coating would remain as a film-like material. - Place the coating onto the textile with the printed (image) side facing upwards.- Put a sheet of isolation paper onto the image, with the glossy side of the isolation paper facing towards the image.

- Transfer for 15-30 seconds and then remove the textile, peel the isolation paper after cooled

Printing Picture

Notice

1.Had better not to wash the textile in 24 hours after transferring.2.Washing the textile in cold or 30-40°C water. Do not wash with strongly alkaline detergents, and no bleach. Avoid rubbing the transferred pattern when hand washing. 3.Do not wring. Line dry in shade recommended.4.Don’t dry-clean.

In this way, the pictures on the clothing and texitles will be kept well for a longer time.

A3, A4 heat transfer paper for garment