Welcome to ECBAY
marine combined windlass & winch
marine combined windlass & winch

Detailed Product Description


This marine combined windlass & winch mostly driven by hydraulic pressure, hydraulic pump provide motives for the system, promote the hydraulic motor running, pass to the pinion gear which installed on motors axle end, pinion gear promote bull gear to slow running. The bull gear connect with principal axis, principal axis running promote gypsy wheel through hand-operated proportional valve to control hydraulic motors positive and reverse rotation, speed-up and speed-down, accomplish the work of drop and weigh anchor.

    Its one side equipped with a windlass drum,which is used to roll mooringrope, when ship mooring, through a clutch to accomplish the combine with principal axis, promote the windlass drum running, accomplish the moorin gropes veer and haul action.I

    ts one side equipped with a warpingbarrel, increase greater convenience for ship to moor and dock.

    Its base is composed of high-strength steel plates welded together,turn parts bearing use the copper of high quality. The installmethod of shiphull is connect with bolt, installation convenience. Its has sound structure,high quality making,low price,simple operation,suitable for all kinds of small and medium-sized ship to moor and dock.


      

  Technical specifications

a.  Achoring Part

     Dia of Chain                 44mm(AM2)

     Working load:               82.3kN

    Rated speed:                 9m/min

    Overload pull:                123.4kN

    Holding load:                 247kN

    Quan of wheel:              1

  b. Drums Part

     Working load:               700kN 

     Rated speed:                15m/min

     Dia of rope:                  φ35mm

     Capacity for the rope:     190m(6 Layers)

     Quan of drum:               1

c  .Warping part

     Warping pull:               55kN

d.  Hydraulic motor part

    Type                            IHM31-3600

    Discharge                     3600ml/min

    Rated pressure             20MPa

    Pressure in fact            12MPa

   Pressure in over load     18MPa

  e. Hydraulic system part

    Type of el-motor             Y180L-4-H×2 (IP44,F )

    Power                           22kW

    Rotating speed              1460r/min

    Working duty                 S1

    Pumps type                  Q63YCY14-1B×2

    Valve                            CSBF-G25

   Set pressure                  22MPa

   Rated flowing                 80L/min

   Oil boxs cubage             320L

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.