Detailed Product Description
This combined chain windlass mostly driven by hydraulic pressure, hydraulic pump provide motives for the system, promote the hydraulic motor running, pass to the pinion gear which installed on motors axle end, pinion gear promote bull gear to slow running. The bull gear connect with principal axis, principal axis running promote gypsy wheel through hand-operated proportional valve to control hydraulic motors positive and reverse rotation, speed-up and speed-down, accomplish the work of drop and weigh anchor.
Its one side equipped with a windlass drum,which is used to roll mooringrope, when ship mooring, through a clutch to accomplish the combine with principal axis, promote the windlass drum running, accomplish the moorin gropes veer and haul action.I
ts one side equipped with a warpingbarrel, increase greater convenience for ship to moor and dock.
Its base is composed of high-strength steel plates welded together,turn parts bearing use the copper of high quality. The installmethod of shiphull is connect with bolt, installation convenience. Its has sound structure,high quality making,low price,simple operation,suitable for all kinds of small and medium-sized ship to moor and dock.
Technical specifications
a. Achoring Part
Dia of Chain 44mm(AM2)
Working load: 82.3kN
Rated speed: 9m/min
Overload pull: 123.4kN
Holding load: 247kN
Quan of wheel: 1
b. Drums Part
Working load: 700kN
Rated speed: 15m/min
Dia of rope: φ35mm
Capacity for the rope: 190m(6 Layers)
Quan of drum: 1
c .Warping part
Warping pull: 55kN
d. Hydraulic motor part
Type IHM31-3600
Discharge 3600ml/min
Rated pressure 20MPa
Pressure in fact 12MPa
Pressure in over load 18MPa
e. Hydraulic system part
Type of el-motor Y180L-4-H×2 (IP44,F )
Power 22kW
Rotating speed 1460r/min
Working duty S1
Pumps type Q63YCY14-1B×2
Valve CSBF-G25
Set pressure 22MPa
Rated flowing 80L/min
Oil boxs cubage 320L
