For tensile, compression, bending cutting, shearing,tearing test Max Capacity: 200N, 500N, 1 KN, 2 KN and 5KN
WD-P1000 Series Single Arm Electronic Tensile Tester
Main functions
WD-P1000 series are suitable for tensile, compression, bending cutting, shearing and tearing test of rubber, plastic, electrical wire and cable, composite, plastic profiled bar, waterproof roll, etc. They may add test methods or rules according to customers requirement. They are essential testing instrument for quality testing section, university and college, research institution and industrial and mining enterprise.
Main Technical Specifications:
1. Max Capacity: 200N, 500N, 1 KN, 2 KN and 5KN
2. Range of testing force: 2100
3. Accuracy of force: ≤±5% of indicated value
4. Structure: Single Arm Type
5. Testing speed: 0.01 mm/min -500 mm/min, stepless speed regulation
6. Precision of testing forceerror less than ±1
7. Precision of displacement: 0.01mm
8. Resolution: 1/200000 of max testing force
6. Relative error of displacement: ±0.5%
7. Effective Tension space: 600mm or 900mm
8. Host size: 500×300×1650mm
9. Power supply: 220V 50Hz;
10. Working environment: Indoors temperature1030, Relative humidity≤80%
Main Configuration
1. Host machine
2. Single beam
3. High precision load sensor;
4. Chinese servomotor and servo driver;
5. Precise reducer;
6. Precise leading screw;
7. Chinese photoelectric encoder (only 1KN, 2KN, 5KN);
8. Single chip controller;
9. One set of tension, compression and bending grip;
Characteristics
a. Adopts Chinese DC servo motor and servo driver, it is stable and can protect
automatically, the adjusting velocity can be 1:500
b. Adopts the precision leading screw and precision reducer to drive, it is
sooth and low noise.
c. Automatic zero, the system will be zero automatically if receive the start
order
d. Automatic choose the travel it can enter the right travel according to
the load so that it can ensure the measurement accuracy
e. Automatic test it can test automatically after setting the parameters
f. Batch test specimen it can test 3 batch test specimens one time if the
specimen is the same parameter
g. Automatic print it can print the test result after finishing the test
automatically
h. Real-time display it can display the testing force and peak at real-time
i. Limit protection it can protect at program-control and mechanically
j. Over-load protection it can stop automatically when the load is more than
2%-10% of Max. Value
k. Emergency stop it can turn off the power.
WD-P1000 Digital Tensile Strength Tester
