1.The drive power according to GB/T 24825-2009 and IEC 62384:2006. 2.It can test Input/Output Characteristics Test (AC&DC),
WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics Test (AC&DC), Input Start Characteristics Test (DC)Specification:1. Input Characteristics Test (AC) •To measure the input voltage, current, power, power factor, power grid frequency, total harmonic and the harmonic component of 0 ~ 50 times, wave ratio, initial phase angle, peak phase angle, the phase Angle. • The fundamental frequency scope of the current and voltage : 45Hz~65Hz; Narrowband range: 45 Hz ~ 5 kHz; Broadband range: 45 Hz ~ 1 MHz. • Voltage range: 3 ~ 300 V (CF = 1.67); Current range: 5mA ~ 2.7A (CF = 3); Power range: 0.015 ~ 800 W; Power factor range: 0.000 ~ + 1.000.2. Input Characteristics Test (DC) • Measuring voltage, current, power. • Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4000W3. Output Characteristics Test (AC) • Measuring lamp voltage, lamp current, and lamp power. • Lamp voltage range: 3~300V(CF=3); Lamp current range: 5mA~2.7A(CF=3); Lamp power range: 0.015~800W4. Output Characteristics Test (DC) • Measuring output lamp voltage, lamp current, lamp power, ripple wave current. • Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4KW; Ripple wave current range: 5mA~2.5A.5. Output Start Characteristics Test (DC) • Change curve and data of the measuring lamp voltage and lamp current within 0~2 seconds. • Lamp voltage range: 3~500V; • Lamp current range: 5mA~8A
WT2080 LED Power Driver Tester
