The OND-6100S Ultrasonic Flaw Detector are used widely in various lines. It is of practicle usage and portable convenience
6100s digital ultrasonic flaw detector
Introduction:
The OND-6100S digital ultrsonic flaw detector offers state-of –the-art technology in a package that is compact and lightweight 1.28kg. It is a full-featured and reliable instrument which can be used in various industries. Suitable for various detection demands of forged pieces, welding lines, airplane parts.
The OND-6100S adopts an embedded computer system and a super large-scale field programmable IC design, which combine all good performance of a large ultrasound system in a very small space: at least 65dB detection sensitivity surplus will meet detection demand for large forged pieces or coarse-crystal material; LAN Ethsmet port for real-time communication with a PC(Host) and remote control; Cine loop function for recording the dynamic scanning process; The new-type color TFT LCD results in optimize read & measure effect and visual comfort; The simple but convenient surface wave tracking function is good for immersion detection; Together with new techniques and new function such as DAC, RF echo display, large memory and USD port, the OND-6100S becomes a handy ultrasonic flaw detector with excellent performance. Furthermore, the fast response time of the color TFT LCD enables display of last scanning echoes; the touch keypad is reliable and comforatble for use; its outstanding EMC design significantly increases field anti-interference of the system.
Main feasures:
Transmitter | Pulse Square Wave Pulser Transmitter Pulse Voltage:25-400V, continuously |
Test Modes | Pulse echo and dual transmission |
Damping | 400. 80 Ohm |
Frequency | 0.5-20MHz, Broadband/narrowband optional |
Gain | 0.0-110.0dB. Steps as 0.1,1.0,2.0,6.0dB |
Material Velocity | 1000-15000m/s continuously adjustable, 30 common material velocities selectable |
Range | 0.0-10000mm longitudinal wave at steel velocity. Range continuously variable with minimum 0.1mm increments. |
Rectification Alarm | Positive halfwave, negative halfwave, full wave, RF Real-time alarm signal indicated by horn or LED indicator. |
Display | 5.7” high-brightness TFT color LCD |
Pulse Shift | -20~3000μs |
Probe Zero Offset | 0-999.9μs |
Pulse Repetition Frequency(PRF) | 25-1000Hz, auto and manual adjustment modes optional |
Vertical Linearity Accuracy | ≤3% |
Horizontal Linearity Accuracy | ≤0.1% |
Surplus Sensitivity | ≥65dB(200Φ2 flat bottom hole) |
Resolutions | ≥36dB |
Dynamic Range | ≥32dB |
Reject(suppression) | 0~90% |
Electric Noise Level | <10% |
Interface | C6 transducer connections, USB HOST, LAN, RF OUT, Two-dimensional encoder interface |
Power Supply | Large-capacity Li Battery, no memory effect: Battery Operating time: More than 6 hours |
Environmental temperature | -30~50°C |
Relative Humidity | 20%~95%RH |
Weight | 1.28kg(with battery) |
Main Specifications:
♦Small dimension, lightweight, portable, fully-sealed, highly-reliable design especially suitable for working outdoors.
♦Up to 640MHz sampling frequency, measurement resolution of 0.1mm with minimum range of 3mm.
♦Operating Frequency: 0.5 20MHz, surplus sensitivity up to 65Db
♦Bright, high resolution(640×480) color TFT display realizing the best measurement result in similar products
♦High performance square wave pulser with tuning option allows the operator to tune the pulse width of the square wave pulser to optimize transducer performance. This maximizes signal-to-noise and penetration in difficult materials such as highly-attenuated materials or thin work-pieces.
♦LAN port allows remote data transfer and management. It provides management to instrument parameters when the instrument is used as independent square wave pulser.
♦High-speed USB interface allows data storage on USB drive and PC communication. To interface with a mouse to secure accurate analysis on report with A-scan.
♦Internal charger, auto switch between “charge” and “work”. Power supplied by battery or AC mains. The operating time of onboard Li battery is more than 6 hours.
If u have any question, pls feel free to contact me!
The OND-6100S Ultrasonic Flaw Detector
