water tester 1.LED dispaly 2.Temperature deflection adjusting meet with different demands
water tester
6B-200-type water single parameter speed measuring device
1.Functions:
1.Shell mold design, heat-resistant and anti—corrosion with transparent BOP cover.
2.LED display with Chinese and English menu. It easy to setup and use.
3.Reach the set temperature in 10 min, and timing remind function. 4.Single wavelength, the center wavelength of 610nm. 5.Memory standard curve can be artificially set, save, and modify. 6.National standard samples can be used to establish curve automatic computation.
2.Technical parameters
1.Temperature range: 0-200 °C. 2.Measurement error: ≤ ± 5%. 3.Measuring range: COD :1-5000 mg / L (More than dilution determination) TCOD digestion time: 10 minutes digestion temperature: 165 °C ± 1 °C 4.Wavelength range: 610 ± 1 (nm). 5.Batch samples: 12 (standard,It also can be optional according to customer) 6.Number of curves: with more than 100 standard curve. 7. Stored data: 2000. 8.Anti chlorine Interference: {cl-} <1200mg / l; {cl-} <12000mg /
3.Features and BenefitsEasy to Use and FastThe SAH 6B-12 Dry Thermostat Reactor provides unique one-key operation. Programs for Hach procedures with digestion are preprogrammed into the instrument.And it’s fast—the block heats from 20 to 165°C in less than 10 minutes.
Safe to OperateThe fully insulated heater block of the 6B-12 reactor means there can be no skin contact with the heater block.Temperature safeguards are provided to prevent overheating. The lids are transparent and lock do deter premature checking of the progress of the reaction.
VersatileUse the 6B-12 reactor for digestions for metals analysis,digestions for nutrients analysis, or culture biological samples. Control temperatures in the reactor from 37 to 165°C in 1°C increments. In addition to preprogrammed digestion methods, use the reactor to program and store up to three custom methods.
Optional Dual Block for Simultaneous DigestionsTwo heat blocks in the 6B-12reactor give the operator independent control of two temperatures and durations.Use this option to run two programs at the same time.
Applications
Temperature(°C) | Time(minutes) | |
COD | 165 | 10 |
TN | 122 | 30 |
TP | 122 | 30 |
Simple Operations
Press Timer2 and SET to enter setting interface. By setting the next turn, highlight the font for the selected current. Press the enter button to enter the corresponding menu settings.Press the SET button next turn, select SET WORKVALUE, press ENTER to enter the set temperature value, then press the SET button to enter the digital switch, digestion key to set the temperature and digestion time. Temperature curve can be set within five saved.Press ENTER to confirm and exit the setting screen, press the PAGE button to confirm the save and exit. Turn off the instrument to boot.
6B-200-type water single parameter speed measuring device water tester
